Beaver Valley Supply HONGX160-QHX2

Honda 4.8 HP Horiz. Engine | “H” Type 6:1 Gear Red | 1.97″ x 3/4″ Shaft | Built In Muffler Exhaust Honda 4.8 Net (Cont.) HP Horiz. Engine | “H” Type 6:1 Gear Reduction | 1.97″ x 3/4″ Crank Shaft | Built In Muffler Exhaust PRICE DOES NOT INCLUDE SETUP OR SHIPPING – PRICED FOB FACTORY GX120/160/200 Quality and performance come standard. Honda’s GX series engines are legendary for superior reliability and performance. And there’s no doubt about it: the GX120 lives up to the legend. Lower noise levels, lower vibration, and lower emissions – without sacrificing power output or performance. Common Applications Commercial lawn and garden equipment Tillers / cultivators Generators Construction / industrial equipment Agricultural equipment Water pumps Specs GX120 GX160 GX200 Engine Type Air-cooled 4-stroke OHV Air-cooled 4-stroke OHV Air-cooled 4-stroke OHV Bore x Stroke 60 X 43.5 mm 68 X 45 mm 68 X 54 mm Displacement 122 cm3 163 cm3 196 cm3 Net Power Output* 3.2 hp (2.4 kW) @ 3,600 rpm 4.8 hp (3.6 kW) @ 3,600 rpm 5.8 hp (4.3 kW) @ 3,600 rpm Net Torque 5.5 lb-ft (7.3 Nm) @ 2,500 rpm 7.6 lb-ft (10.3 Nm) @ 2,500 rpm 9.1 lb-ft (12.4 Nm) @ 2,500 rpm PTO Shaft Rotation Counterclockwise (from PTO shaft side) Counterclockwise (from PTO shaft side) Counterclockwise (from PTO shaft side) Compression Ratio 8.3:1 9.0 : 1 8.5:1 Lamp/Charge coil options 25W, 50W 25W, 50W / 1A, 3A, 7A 25W, 50W / 1A, 3A, 7A Carburetor Butterfly Butterfly Butterfly Ignition System Transistorized magneto Transistorized magneto Transistorized magneto Starting System Recoil Recoil Starter Recoil Starter Lubrication System Splash Splash Splash Governor System Mechanical Centrifugal Mechanical Mechanical Air Cleaner Dual Element Dual Element Dual element Oil Capacity 0.59 US qt. (0.56 L) 0.61 US qt. (0.58 L) 0.63 US qt (0.6l) Fuel Tank Capacity 2.1 U.S. qts (2.0 liters) 3.3 U.S. qts (3.1 liters) 3.3 U.S. qts (3.1 liters) Fuel Unleaded 86 octane or higher Unleaded 86 octane or higher Unleaded 86 octane or higher Dry Weight 28.9 lbs. (13.2 kg) 33 lbs. (15.1 kg) 35 lbs. (16.1 kg) Dimensions GX120 GX160 GX200 Length (min) 11.7” (297 mm) 12.2″ (312 mm) 12.6″ (321mm) Width (min) 13.6” (346 mm) 14.3″ (362 mm) 14.8″ (376mm) Height (min) 13.0” (329 mm) 13.6″ (346 mm) 13.6” (346 mm) Performance Curves The SAE J1349 standard measures net horsepower with the manufacturer’s production muffler and air cleaner in place. Net horsepower more closely correlates with the power the operator will experience when using a Honda engine powered product. The power rating of the engines indicated in this document measures the net power output at 3600 rpm (7000 rpm for model GXH50, GXV50, GX25 and GX35) and net torque at 2500 rpm, as tested on a production engine. Mass production engines may vary from this value. Actual power output for the engine installed in the final machine will vary depending on numerous factors, including the operation speed of the engine in application, environmental conditions, maintenance and other variables. [/tab] [/tabgroup]

Category: Gas Motors