Worksaver 48″ Grapple Rake | Max HP-38 | Fits JD 200X,200CX,D120,D160,H120,H130,& H160

Worksaver 48″ Grapple Rake | Max HP-38 | Fits JD 200X,200CX,D120,D160,H120,H130,& H160 Worksaver 48″ Grapple Rake | For JD Sub-Compact Tractors PRICE DOES NOT INCLUDE SETUP OR SHIPPING – PRICED FOB FACTORY *Fits Loaders that use the John Deere hook & pin type quick attach mount (200X, 200CX, D120, D160, H120, H130, H160) *Because the length of hose required to go from the attachment to the location of the power units remote hydraulic outlets can vary, the hoses & couplers are not supplied . It is recommended that you purchase and install two 90º hydraulic fittings in the 2” x 8” hydraulic cylinder. The cylinder has ¾” – 16 ORB (SAE 8). These are for O-Ring style fittings that do not require thread sealant. See Tab Below For Couplers & Loader Hose Kits To Connect To Tractor Rear Remotes. Features Parts Breakdown Hose Kits & Couplers Worksaver Grapple Rake Features Sized to allow use on compact tractors up to 38 HP. 31″ upper grapple Upper grapple, lower tines have gripping notches to help retain loose materials. 2×8 cylinder Greaseable pivot points for long service life. Shipped LESS HOSES & FITTINGS, allowing the dealer to correctly match the hose length to the tractor / loader. Parking stand standard Tractor remote hydraulic ports are required to operate the grapple. Small size, big versatility the CTMG 48-inch grapple for compact tractors up to 38 HP handles limbs, prunings, debris and so much more. Single upper grapple of 3/8” steel is 31” wide with CNC cut gripping notches cut into the tines to help retain brush and other loose materials. 48-inch lower rake is made from 1/2“ steel also featuring gripping notches to help retain loose materials. Heavy-wall tubing runs through the lower tines with gussets placed at each point of contact for added strength. Two models are available, CTMG-48S for those loaders with the skid steer type mount, and CTMG-48JD for those loaders that use the John Deere hook & pin type quick attach mount (200X, 200CX, D120, D160, H120, H130, H160). Both units feature standard parking stand for easy storage & parking of the unit on a hard flat surface. Compact Tractor Tine Grapple Specifications – Designed For Tractors Up To 38 HP Only Model CTMG-48S CTMG-48JD Overall Width (in/mm) 48 / 1219 48 / 1219 Mount Type Skid Steer JD Quick-change Carrier Overall Height Closed (in/mm) 32.75 / 832 32.75 / 832 Grapple Opening (in/mm) 33 / 838 33 / 838 Upper Grapple Width (in/mm) 31 / 787 31 / 787 Lower Grapple Width (in/mm) 48 / 1219 48 / 1219 Tine Spacing (in/mm) 7.5 / 191 7.5 / 191 Number of Tines/Grapples (lower/upper) 7 / 4 7 / 4 Reinforcing Tubes Between Lower Tines Yes Yes Number of Hydraulic Cylinders 1 1 Cylinder Size 2″ x 8″ 2″ x 8″ Weight (lbs/kg) 320 / 145 310 / 140 Product No. 811850 811855 WO2505650 1/2″ SAE Male & Female Flat-Faced Coupler Set 3/4″-16-ORB $ 195.00 Add to List WO2505856 Loader Hose Kit | 1/2″x15′ Hoses,FF Couplers,Pioneer Couplers,JIC/O-Ring Connectors, & Mounting $ 380.00 Add to List WO2505857 Loader Hose Kit | 1/2″x25′ Hoses,FF Couplers,Pioneer Couplers,JIC/O-Ring Connectors, & Mounting $ 465.00 Add to List

Worksaver 48″ Grapple Rake for JD Sub-Compact Tractors | Up to 38 HP