WFMKX2-100-36

Westfield MKX2 10″X36′ Auger | Low Profile Hopper | Up To 6000 BPH | 40 HP Req | 800 PSI Req Westfield MKX2 10″X36′ Auger | Low Profile Hopper | Up To 6,000 BPH | 40 HP Req | 800 PSI Req Features New MKX2 Features Specs Length Calculator Accessories MKX2 100-36 The MKX2 100×36 combines a 36′ main tube and a 9′ swing away to make auger set up a breeze. Just drive the tractor up to the bin, lower and swing the hopper into position and you’re ready to load your truck or trailer. Best of all, the MKX2 100×36 Truck Loader offers the capacity, quality, and safety you’ve come to expect from Westfield. MKX2 10-36 Features Flexible Positioning – Swing tube on left or right side Only 40 PTO HP required Manual Safety Winch Lift 12.5″ hopper height, plus rubber extension (10.5″ for low profile model) clears low bin unload discharges with ease Height Raised – 22’7″ Tubing – 14 gauge welded steel Flighting – 7 gauge with 10 gauge “Wear Edge” at grain transfer points Flighting Shaft – 2″ x 11 GA tubing PTO – 14 series with 5/16″ shear bolt HP Required – 40 hp Track – High yield 11GA roll formed Undercarriage – 3″ x 11GA A frame Axle – 2.5″ x 2.5″ x 1/8″ wall sq tubing Hubs and wheels – 4 bolt automotive hub, 15″ wheel Lift – Manual Safety Winch (Optional Hydraulic & Elec) 1/4″ aircraft cable Low Profile Hopper – Open Discharge Spout Open Discharge Spout Allows for more efficient flow out of the tube New tapered bearing for increased life span Equipped with plastic hood for sleeker appearance Reduced HP Requirements Included on 10”, 13” and 16” augers Redesigned Boot Redesigned Boot Separate boot flight with removable shafts 30’ Tubes & Flights 30’ Tubes & Flights Less tube flange and flight connections lead to less auger noise Less tube and flight hardware reduces time needed to assemble Common flight and tube lengths leading to less variation to stock Included on 10”, 13”, and 16” augers Cylinder Updates Cylinder Updates Commonize cylinders to use with various auger sizes (Fewer cylinders required to stock) Change from internal check valve to external check valve (Easier to access/service/replace in the field) @media (max-width:480px){#cp_calculatedfieldsf_pform_5{min-height:706px;}}@media (max-width:768px){#cp_calculatedfieldsf_pform_5{min-height:402px;}}@media (max-width:1024px){#cp_calculatedfieldsf_pform_5{min-height:436px;}}@media (min-width:1024px){#cp_calculatedfieldsf_pform_5{min-height:612px;}} function doValidate_5(form, validation_only) { validation_only = validation_only || false; window[‘cff_enabling_form’ ] = function(_form){ if(!(_form instanceof $dexQuery)) _form = $dexQuery(_form); _form.validate().settings.ignore = ‘.ignore,.ignorepb’; _form.removeData(‘being-submitted’); _form.find(‘.submitbtn-disabled’).removeClass(‘submitbtn-disabled’).prop(‘disabled’, false); _form.find(‘.cff-processing-form’).remove(); }; window[‘cff_disabling_form’] = function(_form){ if(!(_form instanceof $dexQuery)) _form = $dexQuery(_form); if(cff_form_disabled(_form)) return; _form.find(‘.pbSubmit,:submit’).addClass(‘submitbtn-disabled’).prop(‘disabled’, true); _form.data(‘being-submitted’,1); var d = document.createElement(‘div’); $dexQuery(d).addClass(‘cff-processing-form’).appendTo(_form.find(‘#fbuilder’)); }; window[‘cff_form_disabled’ ] = function(_form){ if(!(_form instanceof $dexQuery)) _form = $dexQuery(_form); return (‘undefined’ != typeof _form.data(‘being-submitted’)); }; var form_identifier = ‘_5’; if(typeof cpcff_validation_rules == ‘undefined’) cpcff_validation_rules = {}; if(typeof cpcff_validation_rules[form_identifier] == ‘undefined’) cpcff_validation_rules[form_identifier] = {}; var $dexQuery = (fbuilderjQuery) ? fbuilderjQuery : jQuery.noConflict(), _form = $dexQuery(“#cp_calculatedfieldsf_pform”+form_identifier), form_disabled = function(){cff_form_disabled(_form);}, disabling_form = function(){cff_disabling_form(_form);}, enabling_form = function(){cff_enabling_form(_form);}; if(form_disabled()) return false; _form.find(‘[max=””]’).removeAttr(‘max’); _form.find(‘[min=””]’).removeAttr(‘min’); _form.find(‘[step=””]’).removeAttr(‘step’); _form.validate().settings.ignore = ‘.ignore’; var cpefb_error = !_form.validate().checkForm(); var validation_rules = cpcff_validation_rules[form_identifier], processing_form = function() { if ( ‘extra_validations’ in $dexQuery.fbuilder && Object.prototype.toString.call($dexQuery.fbuilder.extra_validations) === ‘[object Object]’ ) { for (let i in $dexQuery.fbuilder.extra_validations) { if ( typeof $dexQuery.fbuilder.extra_validations[i] == ‘function’ && !$dexQuery.fbuilder.extra_validations[i](form, validation_rules, processing_form) ) { enabling_form(); return false; } } } for(var rule in validation_rules) { if(!validation_rules[rule]) { $dexQuery(form).trigger(‘cff-form-validation’, false); return; } } if ( validation_only ) { $dexQuery(form).trigger(‘cff-form-validation’, true); return; } _form.find(“[name$=’_date’][type=’hidden’]”).each(function(){ var v = $dexQuery(this).val(), name = $dexQuery(this).attr( ‘name’ ).replace(‘_date’, ”), e = $dexQuery(“[name='”+name+”‘]”); if( e.length && ! $dexQuery(“[id='”+name+”_datepicker_container’]”).length ){ e.val( String( e.val().replace( v, ” ) ).trim() ); } }); _form.find(“select option[vt]”).each(function(){ var e = $dexQuery(this); e.attr(‘cff-val-bk’, e.val()).val(cff_sanitize(e.attr(“vt”), true)); }); _form.find(“input[vt]”).each(function(){ var e = $dexQuery(this), q = $dexQuery(‘[id=”‘+e.attr(‘id’)+’_quantity”]’); e.attr(‘cff-val-bk’, e.val()).val(cff_sanitize(e.attr(“vt”), true)+(q.length ? ‘ (‘+Math.max(1, q.val())+’)’ : ”)); }); _form.find(‘.cpcff-recordset,.cff-exclude :input,[id^=”form_structure_”]’) .add(_form.find( ‘.ignore’ )).attr(‘cff-disabled’, 1).prop(‘disabled’, true); disabling_form(); if ( _form.attr( ‘target’ ) == undefined && window.self !== window.top ) { _form.attr( ‘target’, ‘_top’ ); } if ( _form.attr( ‘target’ ) != undefined && NOT( IN( _form.attr( ‘target’ ).toLowerCase(), [ ‘_blank’, ‘_self’, ‘_top’, ” ] ) ) ) { let loadHandler = function(){ if ( $processed_flag ) return; $processed_flag = true; _form.find(‘[cff-val-bk]’).each(function(){ var e = $dexQuery(this); e.val(e.attr(‘cff-val-bk’)).removeAttr(‘cff-val-bk’); }); _form.find(‘[cff-disabled]’).prop(‘disabled’, false).removeAttr(‘cff-disabled’); if(!/^(s*|_self|_top|_parent)$/i.test(_form.prop(‘target’))) { enabling_form(); } $dexQuery(document).trigger(‘cff-form-submitted’, _form); }, $iframe = $dexQuery(‘[name=”‘+_form.prop( ‘target’ )+'”]’), $processed_flag = false; if ( $iframe.length ) { $iframe.off(‘load.cff-form-submission’).on(‘load.cff-form-submission’, loadHandler); setTimeout(function() { $iframe.off(‘load.cff-form-submission’); loadHandler(); }, 3000); } } if(‘nativeSubmit’ in _form[ 0 ]) _form[ 0 ].nativeSubmit(); else _form[ 0 ].submit(); }; try{ _form.find(‘[name=”cp_ref_page”]’).val(parent.window.document.location.href); } catch (err) { _form.find(‘[name=”cp_ref_page”]’).val(document.location.href); } validation_rules[‘fields_validation_error’] = (cpefb_error==0); /* 1: Do not submit if the equations are being evaluated */ validation_rules[‘no_pending’] = (!(form_identifier in $dexQuery.fbuilder.calculator.processing_queue) || !$dexQuery.fbuilder.calculator.processing_queue[form_identifier]) && !$dexQuery.fbuilder.calculator.thereIsPending(form_identifier); if(!validation_rules[‘no_pending’]) { $dexQuery(document).on(‘equationsQueueEmpty’, function(evt, formId){ if(formId == form_identifier) { $dexQuery(document).off(‘equationsQueueEmpty’); validation_rules[‘no_pending’] = true; processing_form(); } }); } /* End :1 */ if (validation_rules[‘fields_validation_error’]) { processing_form(); } else { _form.valid(); var page = _form.find(‘.cpefb_error:not(.message):not(.ignore):eq(0)’).closest(‘.pbreak’).attr(‘page’)*1; gotopage(page, _form); // Check if the field is inside a popup. _form.find(‘.pbreak:visible .cpefb_error:not(.message):not(.ignore)’).each(function(){ let p = $dexQuery(this).closest(‘.cff-popup-field’); if(p.length > 0) { SHOWFIELD(p); } let f = $dexQuery(this).closest(‘.cff-collapsed’); if(f.length > 0) { f.removeClass(‘cff-collapsed’); } }); _form.trigger(‘cff-form-validation’, false); enabling_form(); setTimeout(function(){$dexQuery.fbuilder.openErrorDlg(_form);},50); } return false; } form_structure_5=[[{“form_identifier”:””,”name”:”fieldname5″,”fieldlayout”:”default”,”shortlabel”:””,”index”:0,”ftype”:”fnumber”,”userhelp”:””,”audiotutorial”:””,”userhelpTooltip”:false,”tooltipIcon”:false,”csslayout”:””,”hidefield”:false,”advanced”:{“css”:{“container”:{“label”:”Field container div tag”,”rules”:{}},”label”:{“label”:”Field label”,”rules”:{}},”input”:{“label”:”Input tag”,”rules”:{}},”help”:{“label”:”Instructions for users”,”rules”:{}}}},”title”:”Bin Eave Height (Feet)”,”predefined”:””,”predefinedClick”:false,”required”:true,”exclude”:false,”readonly”:false,”numberpad”:false,”spinner”:false,”size”:”small”,”prefix”:””,”postfix”:””,”thousandSeparator”:””,”decimalSymbol”:”.”,”min”:””,”max”:””,”step”:””,”formatDynamically”:false,”twoDecimals”:false,”dformat”:”digits”,”formats”:[“digits”,”number”,”percent”],”fBuild”:{},”parent”:””},{“form_identifier”:””,”name”:”fieldname2″,”fieldlayout”:”default”,”shortlabel”:””,”index”:1,”ftype”:”fnumber”,”userhelp”:””,”audiotutorial”:””,”userhelpTooltip”:false,”tooltipIcon”:false,”csslayout”:””,”hidefield”:false,”advanced”:{“css”:{“container”:{“label”:”Field container div tag”,”rules”:{}},”label”:{“label”:”Field label”,”rules”:{}},”input”:{“label”:”Input tag”,”rules”:{}},”help”:{“label”:”Instructions for users”,”rules”:{}}}},”title”:”Bin Radius (Feet)”,”predefined”:””,”predefinedClick”:false,”required”:true,”exclude”:false,”readonly”:false,”numberpad”:false,”spinner”:false,”size”:”small”,”prefix”:””,”postfix”:””,”thousandSeparator”:””,”decimalSymbol”:”.”,”min”:””,”max”:””,”step”:””,”formatDynamically”:false,”twoDecimals”:false,”dformat”:”digits”,”formats”:[“digits”,”number”,”percent”],”fBuild”:{},”parent”:””},{“form_identifier”:””,”name”:”fieldname3″,”fieldlayout”:”default”,”shortlabel”:””,”index”:2,”ftype”:”fnumber”,”userhelp”:””,”audiotutorial”:””,”userhelpTooltip”:false,”tooltipIcon”:false,”csslayout”:””,”hidefield”:false,”advanced”:{“css”:{“container”:{“label”:”Field container div tag”,”rules”:{}},”label”:{“label”:”Field label”,”rules”:{}},”input”:{“label”:”Input tag”,”rules”:{}},”help”:{“label”:”Instructions for users”,”rules”:{}}}},”title”:””,”predefined”:”1.4″,”predefinedClick”:false,”required”:false,”exclude”:false,”readonly”:true,”numberpad”:false,”spinner”:false,”size”:”small”,”prefix”:””,”postfix”:””,”thousandSeparator”:””,”decimalSymbol”:”.”,”min”:””,”max”:””,”step”:””,”formatDynamically”:false,”twoDecimals”:false,”dformat”:”number”,”formats”:[“digits”,”number”,”percent”],”fBuild”:{},”parent”:””},{“dependencies”:[{“rule”:””,”complex”:false,”fields”:[“”]}],”form_identifier”:””,”name”:”fieldname4″,”fieldlayout”:”default”,”shortlabel”:””,”index”:3,”ftype”:”fCalculated”,”userhelp”:””,”audiotutorial”:””,”userhelpTooltip”:false,”tooltipIcon”:false,”csslayout”:””,”hidefield”:false,”advanced”:{“css”:{“container”:{“label”:”Field container div tag”,”rules”:{}},”label”:{“label”:”Field label”,”rules”:{}},”input”:{“label”:”Input tag”,”rules”:{}},”help”:{“label”:”Instructions for users”,”rules”:{}}}},”title”:”Exact Auger Length Needed. Please Use The Next Longer Length Of Westfield Auger. Total Formula (H + 1/2D) x 1.4= Auger Length “,”_developerNotes”:””,”predefined”:””,”required”:false,”exclude”:false,”accept_html”:false,”size”:”small”,”eq”:”(fieldname5+fieldname2)*fieldname3″,”min”:””,”max”:””,”suffix”:””,”prefix”:””,”decimalsymbol”:”.”,”groupingsymbol”:””,”readonly”:true,”currency”:false,”noEvalIfManual”:false,”formatDynamically”:false,”dynamicEval”:true,”validate”:false,”fBuild”:{},”parent”:””}],{“0”:{“title”:”Westfield Auger Length Calculator “,”titletag”:”H2″,”textalign”:”default”,”headertextcolor”:””,”description”:”Please Gather The Measurements Below From Your Grain Bin To Find The Appropriate Auger Length For Your Operation. “,”formlayout”:”top_aligned”,”formtemplate”:”cp_cff_13″,”evalequations”:1,”evalequations_delay”:0,”evalequationsevent”:2,”direction”:”ltr”,”loading_animation”:0,”autocomplete”:1,”persistence”:0,”animate_form”:0,”animation_effect”:”fade”,”customstyles”:””,”request_cost”:”fieldname5″,”advanced”:{“css”:{}}},”formid”:”cp_calculatedfieldsf_pform_5″,”setCache”:false,”cache”:false}]; Payment options UMH10-3 10″ X 3′ Long Galvanized Flex Hose $ 95.00 Add to List UMH10-5 10″ X 5′ Long Galvanized Flex Hose $ 165.00 Add to List WFA148 10″x50″ Corn Screen | Screen Installed On Incline Tube Or Main Auger Lower Tube | FACTORY INST $ 731.00 Add to List WFA164 Westfield Poly Bucket Flex Spout | 36″ – 5 Sections | Fits 8″ – 10″ Augers $ 254.00 Add to List WFA184 Westfield Low Profile Hopper Tarp | Fits MK/MKX100/MKX2-100MKX130/MKX2-130 $ 450.00 Add to List WFA269 Westfield Remote Electric Power Swing | Single Motor | MK100/MKX100/MKX2-100 $ 5,297.00 Add to List WFA270 Westfield 10″ Auger Hydraulic PowerSwing | Single Motor | For MK100/MKX100/MKX2-100 $ 3,173.00 Add to List WFA271 Westfield Additional Remote Control For All Electric Powerswings $ 400.00 Add to List WFA282 Westfield No Snag Poly Flex Spout | 3-Section | Fits 10″ Augers $ 330.00 Add to List WFA292 Westfield 10″ Auger Reverser Kit | Reverses Flighting For Quick & Easy Cleanout | For MKX/MKX2-100 $ 1,100.00 Add to List WFA293 Westfield Right Angle Drive | Not For Use With Rev Kit | MKX/MKX2-100 $ 3,392.00 Add to List WFA296 Westfield 10″ Hopper Hyd Lift Kit | Min 1200PSI – Max 2500 PSI | Min Hyd Flow 4.0 GPM | For MKX/MKX2 $ 2,326.00 Add to List WFA331 Westfield Hopper Weight For Lift Cable | MK/MKX/MKX2-100/130 $ 146.00 Add to List WFA336 Westfield Hyd Valve Assy Kit For A296 | To Run The Hyd Hopper Lift From The Auger Instead Of Tractor $ 838.00 Add to List WFA362 Westfield 10″ Auger Hyd PowerSwing | Double Motor | Landing Gear Mounting | For MKX100/MKX2-100 $ 3,740.00 Add to List WFA363 Westfield 10″ Auger Elec PowerSwing | Double Motor | Landing Gear Mounting | For MKX100/MKX2-100 $ 5,895.00 Add to List WFA478 Westfield 10″ Abrasion Resistant Flighting (Hopper, Neck, Incline, & Boot Flights) | MKX/MKX2-100 $ 1,374.00 Add to List WFA532RD Westfield 10″ Electric Hopper Winch | For MK/MKX/MKX2-100’s WITHOUT Electric Powerswing $ 2,918.00 Add to List WFA538RD Westfield 10″ Electric Hopper Winch | For MK/MKX/MKX2-100’s WITH Electric Powerswings $ 3,513.00 Add to List WFA549 Westfield 10″ Auger Hydraulic Powerswing Hopper Mover | Fits MKX/MKX2 Augers & Other Auger Brands $ 2,967.00 Add to List WFA551 Westfield 10″ Auger Electric Powerswing Hopper Mover | Fits MKX/MKX2 Augers & Other Auger Brands $ 3,780.00 Add to List WFX100 Return Credit For PTO Shaft (Blue) When Buying RA Drive Kit | For MK80 & MK/MKX/MKX2-100-36/53/63/73 $ 708.00 Add to List

Westfield MKX2 10″X36′ Auger | Low Profile Hopper | Up To 6000 BPH | 40 HP Req | 800 PSI Req