Westfield 8″ X 71′ MK Series Auger | Standard Hopper | Up To 3,900 BPH

Westfield 8″ X 71′ MK Series Auger | Standard Hopper | Up To 3,900 BPH Westfield 8″ X 71′ MK Series Auger | Standard Hopper | Up To 3,900 BPH *PRICE DOES NOT INCLUDE SETUP OR SHIPPING – PRICED FOB FACTORY Overview Specs Features Length Calculator Accessories Shipped Complete With Shielded 540 CV-PTO Driveline Equipped With Overload Shear Bolts Hyd Lift Cyl With Hoes & Shut Off Valve Hopper Lift System With 5:1 Winch Intake Boot Hopper With Tow Bar & Hitch Jack Tractor End Hyd Couplers 15″ Radial Tires Mounted On Rims MK 80 Westfield MK80 The MK80 Series features an A-frame undercarriage to withstand bowing and maintain rigid alignment during heavy loads. MK80 Features • Available in 51’, 61’ and 71’ lengths • Up to 3,900 bph • A-frame design for maximum stability • Trussing provides maximum support with full bin reach • Choice of mechanical or hydraulic swing auger drives • Equipped with heavy-duty constant velocity (CV) PTO shaft to eliminate vibrations for smoother running and less stress on the drive train • Wear EdgeTM flighting at critical grain transfer points (hopper, swing and removable boot flight) to improve auger performance and durability • Spring loaded safety discharge door on intake hopper guards against main auger overloading • Removable boot flight with Wear EdgeTM to improve performance and durability of lower flighting Wear Edge Technology Wear Edge Technology™ Westfied developed Wear Edge Technology™ to extend the life of the flighting. This provides an extra layer of steel welded to the edge on critical wear points. As a result, flighting lasts longer and needs to be replaced less often – saving time and money. Powder Coat Paint Powder Coat Paint Westfield uses a durable powder coat paint for a strong, long lasting finish that looks good and protects against rust. A Frame Undercarriage A-Frame Undercarriage The MK80 Series features an A-frame undercarriage to withstand bowing and maintain rigid alignment during heavy loads. Safety Discharge Safety Discharge Spring loaded safety discharge door on the intake hopper guards against main overloading. Trussing Trussing Heavy-duty cable trussing provides maximum support with full bin reach. Single Cyl Hyd Lift Single Cylinder Hydraulic Lift Proven cylinder lift provides smooth, fast operation with minimal hydraulic requirements. Combined with the A-frame undercarriage, Westfield’s design allows you to position your auger at the bin with ease. CV PTO Shaft CV-PTO Shaft Assures smooth operation with vibration-free running, longer wear and constant high capacity grain flow. Hopper Lift Arm Hopper Lift Arm Can be quickly changed from the left or right hand side of the auger to give the operator the convenience of unloading on both sides. Track & Lift Assist Track & Lift Assist Continuous 11 GA track is welded to the tube for increased stability and structural support. The multi-roller track shoe reduces the pressure needed to raise the auger and provides a lower transport position. Undercarriage & Wheels Undercarriage & Wheels Heavy-duty A-frame provides support and stability and comes with 15″ transport wheels with 4-bolt cast iron hubs. Standard Hopper Standard Hopper Quickly switches to right or left hand operation. A vertical transport position provides for quick, easy clean-out. • 5″ rubber extension – holds more grain while reducing spillage • Convenient boot clean-out and service access doors @media (max-width:480px){#cp_calculatedfieldsf_pform_7{min-height:706px;}}@media (max-width:768px){#cp_calculatedfieldsf_pform_7{min-height:402px;}}@media (max-width:1024px){#cp_calculatedfieldsf_pform_7{min-height:436px;}}@media (min-width:1024px){#cp_calculatedfieldsf_pform_7{min-height:612px;}} function doValidate_7(form, validation_only) { validation_only = validation_only || false; window[‘cff_enabling_form’ ] = function(_form){ if(!(_form instanceof $dexQuery)) _form = $dexQuery(_form); _form.validate().settings.ignore = ‘.ignore,.ignorepb’; _form.removeData(‘being-submitted’); _form.find(‘.submitbtn-disabled’).removeClass(‘submitbtn-disabled’).prop(‘disabled’, false); _form.find(‘.cff-processing-form’).remove(); }; window[‘cff_disabling_form’] = function(_form){ if(!(_form instanceof $dexQuery)) _form = $dexQuery(_form); if(cff_form_disabled(_form)) return; _form.find(‘.pbSubmit,:submit’).addClass(‘submitbtn-disabled’).prop(‘disabled’, true); _form.data(‘being-submitted’,1); var d = document.createElement(‘div’); $dexQuery(d).addClass(‘cff-processing-form’).appendTo(_form.find(‘#fbuilder’)); }; window[‘cff_form_disabled’ ] = function(_form){ if(!(_form instanceof $dexQuery)) _form = $dexQuery(_form); return (‘undefined’ != typeof _form.data(‘being-submitted’)); }; var form_identifier = ‘_7’; if(typeof cpcff_validation_rules == ‘undefined’) cpcff_validation_rules = {}; if(typeof cpcff_validation_rules[form_identifier] == ‘undefined’) cpcff_validation_rules[form_identifier] = {}; var $dexQuery = (fbuilderjQuery) ? fbuilderjQuery : jQuery.noConflict(), _form = $dexQuery(“#cp_calculatedfieldsf_pform”+form_identifier), form_disabled = function(){cff_form_disabled(_form);}, disabling_form = function(){cff_disabling_form(_form);}, enabling_form = function(){cff_enabling_form(_form);}; if(form_disabled()) return false; _form.find(‘[max=””]’).removeAttr(‘max’); _form.find(‘[min=””]’).removeAttr(‘min’); _form.find(‘[step=””]’).removeAttr(‘step’); _form.validate().settings.ignore = ‘.ignore’; var cpefb_error = !_form.validate().checkForm(); var validation_rules = cpcff_validation_rules[form_identifier], processing_form = function() { if ( ‘extra_validations’ in $dexQuery.fbuilder && Object.prototype.toString.call($dexQuery.fbuilder.extra_validations) === ‘[object Object]’ ) { for (let i in $dexQuery.fbuilder.extra_validations) { if ( typeof $dexQuery.fbuilder.extra_validations[i] == ‘function’ && !$dexQuery.fbuilder.extra_validations[i](form, validation_rules, processing_form) ) { enabling_form(); return false; } } } for(var rule in validation_rules) { if(!validation_rules[rule]) { $dexQuery(form).trigger(‘cff-form-validation’, false); return; } } if ( validation_only ) { $dexQuery(form).trigger(‘cff-form-validation’, true); return; } _form.find(“[name$=’_date’][type=’hidden’]”).each(function(){ var v = $dexQuery(this).val(), name = $dexQuery(this).attr( ‘name’ ).replace(‘_date’, ”), e = $dexQuery(“[name='”+name+”‘]”); if( e.length && ! $dexQuery(“[id='”+name+”_datepicker_container’]”).length ){ e.val( String( e.val().replace( v, ” ) ).trim() ); } }); _form.find(“select option[vt]”).each(function(){ var e = $dexQuery(this); e.attr(‘cff-val-bk’, e.val()).val(cff_sanitize(e.attr(“vt”), true)); }); _form.find(“input[vt]”).each(function(){ var e = $dexQuery(this), q = $dexQuery(‘[id=”‘+e.attr(‘id’)+’_quantity”]’); e.attr(‘cff-val-bk’, e.val()).val(cff_sanitize(e.attr(“vt”), true)+(q.length ? ‘ (‘+Math.max(1, q.val())+’)’ : ”)); }); _form.find(‘.cpcff-recordset,.cff-exclude :input,[id^=”form_structure_”]’) .add(_form.find( ‘.ignore’ )).attr(‘cff-disabled’, 1).prop(‘disabled’, true); disabling_form(); if ( _form.attr( ‘target’ ) == undefined && window.self !== window.top ) { _form.attr( ‘target’, ‘_top’ ); } if ( _form.attr( ‘target’ ) != undefined && NOT( IN( _form.attr( ‘target’ ).toLowerCase(), [ ‘_blank’, ‘_self’, ‘_top’, ” ] ) ) ) { let loadHandler = function(){ if ( $processed_flag ) return; $processed_flag = true; _form.find(‘[cff-val-bk]’).each(function(){ var e = $dexQuery(this); e.val(e.attr(‘cff-val-bk’)).removeAttr(‘cff-val-bk’); }); _form.find(‘[cff-disabled]’).prop(‘disabled’, false).removeAttr(‘cff-disabled’); if(!/^(s*|_self|_top|_parent)$/i.test(_form.prop(‘target’))) { enabling_form(); } $dexQuery(document).trigger(‘cff-form-submitted’, _form); }, $iframe = $dexQuery(‘[name=”‘+_form.prop( ‘target’ )+'”]’), $processed_flag = false; if ( $iframe.length ) { $iframe.off(‘load.cff-form-submission’).on(‘load.cff-form-submission’, loadHandler); setTimeout(function() { $iframe.off(‘load.cff-form-submission’); loadHandler(); }, 3000); } } if(‘nativeSubmit’ in _form[ 0 ]) _form[ 0 ].nativeSubmit(); else _form[ 0 ].submit(); }; try{ _form.find(‘[name=”cp_ref_page”]’).val(parent.window.document.location.href); } catch (err) { _form.find(‘[name=”cp_ref_page”]’).val(document.location.href); } validation_rules[‘fields_validation_error’] = (cpefb_error==0); /* 1: Do not submit if the equations are being evaluated */ validation_rules[‘no_pending’] = (!(form_identifier in $dexQuery.fbuilder.calculator.processing_queue) || !$dexQuery.fbuilder.calculator.processing_queue[form_identifier]) && !$dexQuery.fbuilder.calculator.thereIsPending(form_identifier); if(!validation_rules[‘no_pending’]) { $dexQuery(document).on(‘equationsQueueEmpty’, function(evt, formId){ if(formId == form_identifier) { $dexQuery(document).off(‘equationsQueueEmpty’); validation_rules[‘no_pending’] = true; processing_form(); } }); } /* End :1 */ if (validation_rules[‘fields_validation_error’]) { processing_form(); } else { _form.valid(); var page = _form.find(‘.cpefb_error:not(.message):not(.ignore):eq(0)’).closest(‘.pbreak’).attr(‘page’)*1; gotopage(page, _form); // Check if the field is inside a popup. _form.find(‘.pbreak:visible .cpefb_error:not(.message):not(.ignore)’).each(function(){ let p = $dexQuery(this).closest(‘.cff-popup-field’); if(p.length > 0) { SHOWFIELD(p); } let f = $dexQuery(this).closest(‘.cff-collapsed’); if(f.length > 0) { f.removeClass(‘cff-collapsed’); } }); _form.trigger(‘cff-form-validation’, false); enabling_form(); setTimeout(function(){$dexQuery.fbuilder.openErrorDlg(_form);},50); } return false; } form_structure_7=[[{“form_identifier”:””,”name”:”fieldname5″,”fieldlayout”:”default”,”shortlabel”:””,”index”:0,”ftype”:”fnumber”,”userhelp”:””,”audiotutorial”:””,”userhelpTooltip”:false,”tooltipIcon”:false,”csslayout”:””,”hidefield”:false,”advanced”:{“css”:{“container”:{“label”:”Field container div tag”,”rules”:{}},”label”:{“label”:”Field label”,”rules”:{}},”input”:{“label”:”Input tag”,”rules”:{}},”help”:{“label”:”Instructions for users”,”rules”:{}}}},”title”:”Bin Eave Height (Feet)”,”predefined”:””,”predefinedClick”:false,”required”:true,”exclude”:false,”readonly”:false,”numberpad”:false,”spinner”:false,”size”:”small”,”prefix”:””,”postfix”:””,”thousandSeparator”:””,”decimalSymbol”:”.”,”min”:””,”max”:””,”step”:””,”formatDynamically”:false,”twoDecimals”:false,”dformat”:”digits”,”formats”:[“digits”,”number”,”percent”],”fBuild”:{},”parent”:””},{“form_identifier”:””,”name”:”fieldname2″,”fieldlayout”:”default”,”shortlabel”:””,”index”:1,”ftype”:”fnumber”,”userhelp”:””,”audiotutorial”:””,”userhelpTooltip”:false,”tooltipIcon”:false,”csslayout”:””,”hidefield”:false,”advanced”:{“css”:{“container”:{“label”:”Field container div tag”,”rules”:{}},”label”:{“label”:”Field label”,”rules”:{}},”input”:{“label”:”Input tag”,”rules”:{}},”help”:{“label”:”Instructions for users”,”rules”:{}}}},”title”:”Bin Radius (Feet)”,”predefined”:””,”predefinedClick”:false,”required”:true,”exclude”:false,”readonly”:false,”numberpad”:false,”spinner”:false,”size”:”small”,”prefix”:””,”postfix”:””,”thousandSeparator”:””,”decimalSymbol”:”.”,”min”:””,”max”:””,”step”:””,”formatDynamically”:false,”twoDecimals”:false,”dformat”:”digits”,”formats”:[“digits”,”number”,”percent”],”fBuild”:{},”parent”:””},{“form_identifier”:””,”name”:”fieldname3″,”fieldlayout”:”default”,”shortlabel”:””,”index”:2,”ftype”:”fnumber”,”userhelp”:””,”audiotutorial”:””,”userhelpTooltip”:false,”tooltipIcon”:false,”csslayout”:””,”hidefield”:false,”advanced”:{“css”:{“container”:{“label”:”Field container div tag”,”rules”:{}},”label”:{“label”:”Field label”,”rules”:{}},”input”:{“label”:”Input tag”,”rules”:{}},”help”:{“label”:”Instructions for users”,”rules”:{}}}},”title”:””,”predefined”:”1.4″,”predefinedClick”:false,”required”:false,”exclude”:false,”readonly”:true,”numberpad”:false,”spinner”:false,”size”:”small”,”prefix”:””,”postfix”:””,”thousandSeparator”:””,”decimalSymbol”:”.”,”min”:””,”max”:””,”step”:””,”formatDynamically”:false,”twoDecimals”:false,”dformat”:”number”,”formats”:[“digits”,”number”,”percent”],”fBuild”:{},”parent”:””},{“dependencies”:[{“rule”:””,”complex”:false,”fields”:[“”]}],”form_identifier”:””,”name”:”fieldname4″,”fieldlayout”:”default”,”shortlabel”:””,”index”:3,”ftype”:”fCalculated”,”userhelp”:””,”audiotutorial”:””,”userhelpTooltip”:false,”tooltipIcon”:false,”csslayout”:””,”hidefield”:false,”advanced”:{“css”:{“container”:{“label”:”Field container div tag”,”rules”:{}},”label”:{“label”:”Field label”,”rules”:{}},”input”:{“label”:”Input tag”,”rules”:{}},”help”:{“label”:”Instructions for users”,”rules”:{}}}},”title”:”Exact Auger Length Needed. Please Use The Next Longer Length Of Westfield Auger. Total Formula (H + 1/2D) x 1.4= Auger Length “,”_developerNotes”:””,”predefined”:””,”required”:false,”exclude”:false,”accept_html”:false,”size”:”small”,”eq”:”(fieldname5+fieldname2)*fieldname3″,”min”:””,”max”:””,”suffix”:””,”prefix”:””,”decimalsymbol”:”.”,”groupingsymbol”:””,”readonly”:true,”currency”:false,”noEvalIfManual”:false,”formatDynamically”:false,”dynamicEval”:true,”validate”:false,”fBuild”:{},”parent”:””}],{“0”:{“title”:”Westfield Auger Length Calculator “,”titletag”:”H2″,”textalign”:”default”,”headertextcolor”:””,”description”:”Please Gather The Measurements Below From Your Grain Bin To Find The Appropriate Auger Length For Your Operation. “,”formlayout”:”top_aligned”,”formtemplate”:”cp_cff_13″,”evalequations”:1,”evalequations_delay”:0,”evalequationsevent”:2,”direction”:”ltr”,”loading_animation”:0,”autocomplete”:1,”persistence”:0,”animate_form”:0,”animation_effect”:”fade”,”customstyles”:””,”request_cost”:”fieldname5″,”advanced”:{“css”:{}}},”formid”:”cp_calculatedfieldsf_pform_7″,”setCache”:false,”cache”:false}]; Payment options Loading… .qc_theme_nine > li { color: !important; font-size: px !important; background-color: !important; } .qc_theme_nine > li:hover { background: !important; } .qc_theme_nine > li.current { background: !important; } .ilist-section-25 ul.qc_nav_style_1 li { border: 1px solid !important; } .ilist-section-25 ul.qc_nav_style_1 li { color: !important; font-size: px !important; background-color: !important; } .ilist-section-25 ul.qc_nav_style_1 li:hover { background: !important; } .ilist-section-25 ul.qc_nav_style_1 li.current { background: !important; color: !important; } .ilist-section-25 ul.qc_nav_style_1 > li::after { background: !important; } .ilist-section-25 ul.qc_nav_style_1 li ul.qcld_children li{ /*color: #000 !important;*/ background: #fff !important; } .ilist-section-25 ul.qc_nav_style_1 li ul.qcld_children li:hover{ box-shadow: 4px 0px inset !important; } .ilist-section-25 ul.qc_nav_style_1 li .qcld_menu_status{ box-shadow: 4px 0px inset !important; } MK80 Auger Accessories UMH8-3 8″ Dia X 3′ L Galvanized Flex Hose | Fits WR60/UT60/WRX80/STX80/MK80 $ 75.00 UMH8-5 8″ Dia X 5′ L Galvanized Flex Hose | Fits WR60/UT60/WRX80/STX80/MK80 $ 105.00 WFA107 WF 8″ Safety Discharge Spout | For 8″ Augers | Reduces The Chance Of Damage Due To Bin Overfill $ 71.00 WFA147 Westfield 8″ Corn Screen | Factory Install | For Swing Hopper Tube Or Lwr Tube Of Straight Auger $ 661.00 WFA157 MK80 REVERSER KIT $ 990.00 WFA160 Westfield Standard Hopper Tarp | Fits MK80 & MK/MKX/MKX2-100 Standard Hoppers $ 360.00 WFA164 Westfield Poly Bucket Flex Spout | 36″ – 5 Sections | Fits 8″ – 10″ Augers $ 254.00 WFA199 Right Angle Drive, MK80 (White End PTO) $ 3,356.00 WFX100 Return Credit For PTO Shaft (Blue) When Buying RA Drive Kit | For MK80 & MK/MKX/MKX2-100-36/53/63/73 $ 708.00

A-frame design for maximum stability with up to 3,900 BPH capacity