Westfield 6″ X 16′ Utility Auger – Upper Basic Section

Westfield 6″ X 16′ Utility Auger – Upper Basic Section Westfield 6″ X 16′ Utility Auger To Complete Unit, Motor & Motor Pulley Must Be Added – See Below PRICE DOES NOT INCLUDE SETUP OR SHIPPING – PRICED FOB FACTORY Overview Specs Ideal Uses Literature Parts Flight Speed Calculator Motors, Pulleys, & Accessories Shipped Complete With Power Head Motor Mounting Brackets Tail Cage 12.7″ Double Pulley Two Belts Pulley Shield Outlet Spout Flighting Recommended Pulley Size: 3.5″-4″ Double Groove Note: Recommended Pulley Sizes Are For 1750 RPM Motors For Intermittent Feed: A Slightly Smaller Pulley Will Allow Easier Startup Under Load. Ideal Uses At your grain bins or bulk tanks In drying set-ups Around the dairy barn In feedlots At feedmills or elevators For permanent or semi-permanent auger installations Can be used at grain bins or bulk tanks Westfield UT Auger Literature @media (max-width:480px){#cp_calculatedfieldsf_pform_6{min-height:614px;}}@media (max-width:768px){#cp_calculatedfieldsf_pform_6{min-height:456px;}}@media (max-width:1024px){#cp_calculatedfieldsf_pform_6{min-height:530px;}}@media (min-width:1024px){#cp_calculatedfieldsf_pform_6{min-height:797px;}} function doValidate_6(form, validation_only) { validation_only = validation_only || false; window[‘cff_enabling_form’ ] = function(_form){ if(!(_form instanceof $dexQuery)) _form = $dexQuery(_form); _form.validate().settings.ignore = ‘.ignore,.ignorepb’; _form.removeData(‘being-submitted’); _form.find(‘.submitbtn-disabled’).removeClass(‘submitbtn-disabled’).prop(‘disabled’, false); _form.find(‘.cff-processing-form’).remove(); }; window[‘cff_disabling_form’] = function(_form){ if(!(_form instanceof $dexQuery)) _form = $dexQuery(_form); if(cff_form_disabled(_form)) return; _form.find(‘.pbSubmit,:submit’).addClass(‘submitbtn-disabled’).prop(‘disabled’, true); _form.data(‘being-submitted’,1); var d = document.createElement(‘div’); $dexQuery(d).addClass(‘cff-processing-form’).appendTo(_form.find(‘#fbuilder’)); }; window[‘cff_form_disabled’ ] = function(_form){ if(!(_form instanceof $dexQuery)) _form = $dexQuery(_form); return (‘undefined’ != typeof _form.data(‘being-submitted’)); }; var form_identifier = ‘_6’; if(typeof cpcff_validation_rules == ‘undefined’) cpcff_validation_rules = {}; if(typeof cpcff_validation_rules[form_identifier] == ‘undefined’) cpcff_validation_rules[form_identifier] = {}; var $dexQuery = (fbuilderjQuery) ? fbuilderjQuery : jQuery.noConflict(), _form = $dexQuery(“#cp_calculatedfieldsf_pform”+form_identifier), form_disabled = function(){cff_form_disabled(_form);}, disabling_form = function(){cff_disabling_form(_form);}, enabling_form = function(){cff_enabling_form(_form);}; if(form_disabled()) return false; _form.find(‘[max=””]’).removeAttr(‘max’); _form.find(‘[min=””]’).removeAttr(‘min’); _form.find(‘[step=””]’).removeAttr(‘step’); _form.validate().settings.ignore = ‘.ignore’; var cpefb_error = !_form.validate().checkForm(); var validation_rules = cpcff_validation_rules[form_identifier], processing_form = function() { var recaptcha = $dexQuery( ‘[name=”cp_calculatedfieldsf_pform_6″] [name=”g-recaptcha-response”]’ ); if( recaptcha.length == 0 || /^s*$/.test( recaptcha.val() ) ) { disabling_form(); var grecaptcha_e = $dexQuery( ‘[name=”cp_calculatedfieldsf_pform_6″] .cff-recaptcha’ ); if(grecaptcha_e.length && grecaptcha_e.attr( ‘data-size’ ) == ‘invisible’) { grecaptcha.execute(); if(grecaptcha.getResponse() == ”) { enabling_form(); return false; } } else { alert(‘Please enter the captcha verification code.’); enabling_form(); return false; } } if ( ‘extra_validations’ in $dexQuery.fbuilder && Object.prototype.toString.call($dexQuery.fbuilder.extra_validations) === ‘[object Object]’ ) { for (let i in $dexQuery.fbuilder.extra_validations) { if ( typeof $dexQuery.fbuilder.extra_validations[i] == ‘function’ && !$dexQuery.fbuilder.extra_validations[i](form, validation_rules, processing_form) ) { enabling_form(); return false; } } } for(var rule in validation_rules) { if(!validation_rules[rule]) { $dexQuery(form).trigger(‘cff-form-validation’, false); return; } } if ( validation_only ) { $dexQuery(form).trigger(‘cff-form-validation’, true); return; } _form.find(“[name$=’_date’][type=’hidden’]”).each(function(){ var v = $dexQuery(this).val(), name = $dexQuery(this).attr( ‘name’ ).replace(‘_date’, ”), e = $dexQuery(“[name='”+name+”‘]”); if( e.length && ! $dexQuery(“[id='”+name+”_datepicker_container’]”).length ){ e.val( String( e.val().replace( v, ” ) ).trim() ); } }); _form.find(“select option[vt]”).each(function(){ var e = $dexQuery(this); e.attr(‘cff-val-bk’, e.val()).val(cff_sanitize(e.attr(“vt”), true)); }); _form.find(“input[vt]”).each(function(){ var e = $dexQuery(this), q = $dexQuery(‘[id=”‘+e.attr(‘id’)+’_quantity”]’); e.attr(‘cff-val-bk’, e.val()).val(cff_sanitize(e.attr(“vt”), true)+(q.length ? ‘ (‘+Math.max(1, q.val())+’)’ : ”)); }); _form.find(‘.cpcff-recordset,.cff-exclude :input,[id^=”form_structure_”]’) .add(_form.find( ‘.ignore’ )).attr(‘cff-disabled’, 1).prop(‘disabled’, true); disabling_form(); if ( _form.attr( ‘target’ ) == undefined && window.self !== window.top ) { _form.attr( ‘target’, ‘_top’ ); } if ( _form.attr( ‘target’ ) != undefined && NOT( IN( _form.attr( ‘target’ ).toLowerCase(), [ ‘_blank’, ‘_self’, ‘_top’, ” ] ) ) ) { let loadHandler = function(){ if ( $processed_flag ) return; $processed_flag = true; _form.find(‘[cff-val-bk]’).each(function(){ var e = $dexQuery(this); e.val(e.attr(‘cff-val-bk’)).removeAttr(‘cff-val-bk’); }); _form.find(‘[cff-disabled]’).prop(‘disabled’, false).removeAttr(‘cff-disabled’); if(!/^(s*|_self|_top|_parent)$/i.test(_form.prop(‘target’))) { enabling_form(); } $dexQuery(document).trigger(‘cff-form-submitted’, _form); }, $iframe = $dexQuery(‘[name=”‘+_form.prop( ‘target’ )+'”]’), $processed_flag = false; if ( $iframe.length ) { $iframe.off(‘load.cff-form-submission’).on(‘load.cff-form-submission’, loadHandler); setTimeout(function() { $iframe.off(‘load.cff-form-submission’); loadHandler(); }, 3000); } } if(‘nativeSubmit’ in _form[ 0 ]) _form[ 0 ].nativeSubmit(); else _form[ 0 ].submit(); }; try{ _form.find(‘[name=”cp_ref_page”]’).val(parent.window.document.location.href); } catch (err) { _form.find(‘[name=”cp_ref_page”]’).val(document.location.href); } validation_rules[‘fields_validation_error’] = (cpefb_error==0); /* 1: Do not submit if the equations are being evaluated */ validation_rules[‘no_pending’] = (!(form_identifier in $dexQuery.fbuilder.calculator.processing_queue) || !$dexQuery.fbuilder.calculator.processing_queue[form_identifier]) && !$dexQuery.fbuilder.calculator.thereIsPending(form_identifier); if(!validation_rules[‘no_pending’]) { $dexQuery(document).on(‘equationsQueueEmpty’, function(evt, formId){ if(formId == form_identifier) { $dexQuery(document).off(‘equationsQueueEmpty’); validation_rules[‘no_pending’] = true; processing_form(); } }); } /* End :1 */ if (validation_rules[‘fields_validation_error’]) { processing_form(); } else { _form.valid(); var page = _form.find(‘.cpefb_error:not(.message):not(.ignore):eq(0)’).closest(‘.pbreak’).attr(‘page’)*1; gotopage(page, _form); // Check if the field is inside a popup. _form.find(‘.pbreak:visible .cpefb_error:not(.message):not(.ignore)’).each(function(){ let p = $dexQuery(this).closest(‘.cff-popup-field’); if(p.length > 0) { SHOWFIELD(p); } let f = $dexQuery(this).closest(‘.cff-collapsed’); if(f.length > 0) { f.removeClass(‘cff-collapsed’); } }); _form.trigger(‘cff-form-validation’, false); enabling_form(); setTimeout(function(){$dexQuery.fbuilder.openErrorDlg(_form);},50); } return false; } form_structure_6=[[{“form_identifier”:””,”name”:”fieldname2″,”shortlabel”:””,”index”:0,”ftype”:”fnumber”,”userhelp”:””,”userhelpTooltip”:false,”tooltipIcon”:false,”csslayout”:””,”title”:”Motor Pulley Diameter (Inches)”,”predefined”:””,”predefinedClick”:false,”required”:false,”exclude”:false,”readonly”:false,”numberpad”:false,”size”:”small”,”thousandSeparator”:””,”decimalSymbol”:”.”,”min”:””,”max”:””,”formatDynamically”:false,”dformat”:”number”,”formats”:[“digits”,”number”,”percent”],”fBuild”:[],”parent”:””},{“form_identifier”:””,”name”:”fieldname3″,”shortlabel”:””,”index”:1,”ftype”:”fnumber”,”userhelp”:””,”userhelpTooltip”:false,”tooltipIcon”:false,”csslayout”:””,”title”:”Auger Pulley Diameter (Inches)”,”predefined”:””,”predefinedClick”:false,”required”:false,”exclude”:false,”readonly”:false,”numberpad”:false,”size”:”small”,”thousandSeparator”:””,”decimalSymbol”:”.”,”min”:””,”max”:””,”formatDynamically”:false,”dformat”:”number”,”formats”:[“digits”,”number”,”percent”],”fBuild”:[],”parent”:””},{“form_identifier”:””,”name”:”fieldname4″,”shortlabel”:””,”index”:2,”ftype”:”fnumber”,”userhelp”:””,”userhelpTooltip”:false,”tooltipIcon”:false,”csslayout”:””,”title”:”Motor RPM | Gas Motor RPM=3,000 Electric Motor RPM=1,750″,”predefined”:””,”predefinedClick”:false,”required”:false,”exclude”:false,”readonly”:false,”numberpad”:false,”size”:”small”,”thousandSeparator”:””,”decimalSymbol”:”.”,”min”:””,”max”:””,”formatDynamically”:false,”dformat”:”number”,”formats”:[“digits”,”number”,”percent”],”fBuild”:[],”parent”:””},{“dependencies”:[{“rule”:””,”complex”:false,”fields”:[“”]}],”form_identifier”:””,”name”:”fieldname1″,”shortlabel”:””,”index”:3,”ftype”:”fCalculated”,”userhelp”:””,”userhelpTooltip”:false,”tooltipIcon”:false,”csslayout”:””,”title”:”Calculated Flight Speed | Total Formula – (Motor Pulley/Auger Pulley) x Motor RPM = Flight Speed”,”predefined”:””,”required”:false,”exclude”:false,”size”:”small”,”eq”:”(fieldname2/fieldname3)*fieldname4″,”min”:””,”max”:””,”suffix”:””,”prefix”:””,”decimalsymbol”:”.”,”groupingsymbol”:””,”readonly”:true,”currency”:false,”noEvalIfManual”:true,”formatDynamically”:false,”hidefield”:false,”fBuild”:[],”parent”:””}],{“0”:{“title”:”Auger Flight Speed Calculator “,”description”:”Use The Calculator Below To Determine Your Optimal Flight Speed”,”formlayout”:”top_aligned”,”formtemplate”:”cp_cff_13″,”evalequations”:1,”evalequationsevent”:2,”loading_animation”:0,”autocomplete”:1,”persistence”:0,”animate_form”:0,”customstyles”:””},”formid”:”cp_calculatedfieldsf_pform_6″,”setCache”:false,”cache”:false}]; Payment options Submit Recommended Pulley Size: 3.5″-4″ Double Groove Note: Recommended Pulley Sizes Are For 1750 RPM Motors. Loading… .qc_theme_nine > li { color: !important; font-size: px !important; background-color: !important; } .qc_theme_nine > li:hover { background: !important; } .qc_theme_nine > li.current { background: !important; } .ilist-section-25 ul.qc_nav_style_1 li { border: 1px solid !important; } .ilist-section-25 ul.qc_nav_style_1 li { color: !important; font-size: px !important; background-color: !important; } .ilist-section-25 ul.qc_nav_style_1 li:hover { background: !important; } .ilist-section-25 ul.qc_nav_style_1 li.current { background: !important; color: !important; } .ilist-section-25 ul.qc_nav_style_1 > li::after { background: !important; } .ilist-section-25 ul.qc_nav_style_1 li ul.qcld_children li{ /*color: #000 !important;*/ background: #fff !important; } .ilist-section-25 ul.qc_nav_style_1 li ul.qcld_children li:hover{ box-shadow: 4px 0px inset !important; } .ilist-section-25 ul.qc_nav_style_1 li .qcld_menu_status{ box-shadow: 4px 0px inset !important; } Bushings Double Groove Pulleys Electric Motors UT6 Accessories PU114SKB 1-1/4″ SK Bushing $ 77.00 PU118SDB 1-1/8″ SD Bushing $ 52.00 PU118SDSB 1-1/8″ SDS Bushing $ 53.00 PU118SHB 1-1/8″ SH Bushing $ 48.00 PU118SKB 1-1/8″ SK Bushing $ 58.00 PU138SDB 1-3/8″ SD Bushing $ 65.00 PU138SDSB 1-3/8″ SDS Bushing $ 53.00 PU138SHB 1-3/8″ SH Bushing $ 69.00 PU138SKB 1-3/8″ SK Bushing $ 83.00 PU158SDB 1-5/8″ SD Bushing $ 67.00 PU158SDS 1-5/8″ SDS Bushing $ 48.00 PU158SHB 1-5/8″ SH Bushing $ 70.00 PU158SKB 1-5/8″ SK Bushing $ 100.00 PU1716SHB 1-7/16″ SH Bushing $ 47.00 PU178SDB 1-7/8″ SD Bushing $ 56.00 PU178SDSB 1-7/8″ SDS Bushing $ 84.00 PU178SKB 1-7/8″ SK Bushing $ 80.00 PU1SDB 1″ SD Bushing $ 64.00 PU1SHB 1″ SH Bushing $ 47.00 PU1SKB 1″ SK Bushing $ 81.00 PU34SHB 3/4″ SH Bushing $ 39.00 PU58SHB 5/8″ SH Bushing $ 47.00 PU78SDSB 7/8″ SDS Bushing $ 50.00 PU78SHB 7/8″ SH Bushing $ 42.00