S14 Stump Grinder | 12-30HP | 12-22 GPM | 1-2T Ex | 18″ Rotor | 6″ Cut Depth | S450 Mtr | Less Mount

S14 Stump Grinder | 12-30HP | 12-22 GPM | 1-2T Ex | 18″ Rotor | 6″ Cut Depth | S450 Mtr | Less Mount S14 Stump Grinder | 12-30 HP | 12-22 GPM | 1-2T Ex | 18″ Rotor | 6″ Cutting Depth | S450 Mtr | Less Mount PRICE DOES NOT INCLUDE SETUP OR SHIPPING – PRICED FOB BV ATWOOD, KS * No Case Drain Required * Hydraulic Hoses & Couplers Included *Self Regulated In-Feed *Must Add Mount To Complete – See Below Specs Features Teeth Skid Steer / Loader Mounts Excavator Mounts Skid Steer Specs Skid Steer Specs M odel No. S14 S18 S24 S28 S40 Recommended HP Size 12-30 25-80 30-80 50-120 50-120 Maximum Carrier Size Check GPM & PSI Check GPM & PSI Check GPM & PSI Check GPM & PSI Check GPM & PSI Motor Type Gerotor Gerotor Gerotor Gerotor Bent Axis Piston Hydraulic GPM Check Stump Cutting Size Chart Check Stump Cutting Size Chart Check Stump Cutting Size Chart Check Stump Cutting Size Chart Check Stump Cutting Size Chart Rotor Size 18″ 24″ 24″ 24″ 24″ Number of Teeth 12 34 34 34 20 Tooth Construction Wearsharp ® Planer Planer Planer Wearsharp ® Cutting Wheel Speed Depends on GPM Depends on GPM Depends on GPM Depends on GPM Depends on GPM Cutting Height – Above Ground No limit No limit No limit No limit No limit Cutting Depth – Below Ground 6″ 10″ 10″ 10″ 24″ Maximum Cutting Depth – Per Pass 2″ 5″ 6″ 6″ 1″ Maximum Horizontal Cut 12″ 22″ 22″ 22″ 22″ Swing Arc Self-feeding Self-feeding 80° 80° 85° Hub Torque 150 Ft.-Lbs. 250 Ft.-Lbs. 250 Ft.-Lbs. 803 Ft.-Lbs. – Over Torque Protection Relieve valve Relieve valve Relieve valve Relieve valve Remote Hitch 1″ pivot pins 1″ pivot pins Quick Attach Quick Attach Quick Attach No. of Remotes Required – Hydraulic 1 1 1 1 1 Requires 12 Volt DC No No Yes Yes Yes Unit Weight (Shipping) Lbs. 394 642 995 995 1,200 Excavator Specs Excavator Specs Model No. S14 S18 GXM350 GXM550 GXM750 Baumalight Connection Code A04 A04 A02 A02 A02 Recommended Carrier Size 1-2 ton 1.5-4 ton 1.5-4.5 ton 3.5-8 ton 7-18 ton Motor Type Gerotor Gerotor High efficiency bent axis piston High efficiency bent axis piston High efficiency bent axis piston Hydraulic GPM Check Motor Options Check Motor Options Check Motor Options Check Motor Options Check Motor Options Rotor Size 18″ 24″ 19″ 24″ 24″ Number of Teeth 12 34 16 20 20 Tooth Construction Wearsharp ® Planer Wearsharp ® Wearsharp ® Wearsharp ® Cutting Wheel Speed Depends on GPM Depends on GPM Depends on GPM Depends on GPM Depends on GPM Cutting Height – Above Ground No limit No limit No limit No limit No limit Cutting Depth – Below Ground 6″ 10″ 16″ 24″ 24″ Maximum Cutting Depth – Per Pass 2″ 5″ 3/4″ 1″ 1″ Maximum Horizontal Cut 12″ 22″ 12″ 22″ 22″ Over Torque Protection Relieve valve Relieve valve Relieve valve Relieve valve Relieve valve Hitch 1″ pivot pins 1″ pivot pins Bolt on Bolt on Bolt on No. of Remotes Required – Hydraulic 1 1 1 1 1 Requires 12 Volt DC No No No No No Unit Weight (Shipping) Lbs. 394 642 650 822 1300 Motor Specs MORE TEETH MORE TEETH The high number of teeth means that each tooth needs to do less work. Each of the Stump Blasters teeth only need to make a small cut, because the work is shared by more of our rugged teeth they last longer and usually only require 2 or 3 replacements at a time. The bolt-on designed teeth allow for straightforward replacement. HYDRAULIC MOTOR HYDRAULIC MOTOR Skid steer mounted Stump Blasters run on hydraulic motors. For best results, match your equipments flow rate to one of our available hydraulic motor options. MORE CLEARANCE MORE CLEARANCE The Stump Blaster’s carbide teeth extend a full 1-¼ inches from the rotor. This prevents chips and mulch from getting plugged. More chip clearing produces smoother operation and reduces heat build-up that can damage the rotor and cause premature tooth failure. ROTOR ROTOR The massive ¾” thick steel rotor provides the back bone for the Stump Blaster cutting system. It’s the anchor for the carbide tipped teeth. For smooth operation it’s important that the rotor remains solid, with no flexing. The rugged rotor also provides the Stump Blaster with the extra momentum needed when the grinding is tough, making sure the Stump Blaster can power through the hardest stumps. GREASEABLE PINS GREASEABLE PINS Our grease pins are zinc plated to prevent corrosion which will allow for smoother operation of the units joints over their lifetime. WLD001625 Baumalight 3/8″ Standard Locknut (EACH) $ 5.50 Add to List WLD001678 Baumalight Shim For Round Teeth (EACH) $ 1.50 Add to List WLD001679 Baumalight 300 Series Round Tooth Holder | Angled 700LP-A Green $ 26.00 Add to List WLD001775 Baumalight 5/8″ Bolt For Round Tooth Holder $ 8.00 Add to List WLD004978 Baumalight 24-Pack Of Round High Speed Carbide Tipped H3000 Teeth $ 530.00 Add to List WLH3000 Baumalight Round High Speed Tooth (EACH) | Carbide Tipped | 3/8″ Threads $ 36.00 Add to List WLD001126 Baumalight Mini Skid Steer Plate | For S14 & S18 Stump Grinders $ 364.50 Add to List WLD001127 Baumalight Universal Skid Attachment | For S14 & S18 $ 703.00 Add to List WLD001427 Baumalight Bucket Mount Adapter | For S14 & S18 Stump Grinders $ 414.73 Add to List WLD001943 Baumalight Bobcat Mini Skid Adapter (35.5″ Wide) | For S14 & S18 $ 486.00 Add to List WLD003504 Baumalight ASV & Terex RC30 & PT30 Skid Steer Plate | For S14 & S18 $ 736.00 Add to List Baumalight Excavator Mounting Excavator Mounting Baumalight offers two options to mount your attachment on your excavator, blank weld-on plates & turn key custom solutions. All Baumalight excavator mounting options are manufactured in Canada and our team of experts will work with you to ensure you receive the best solution for your excavator. Blank Weld-On Plates The bank weld-on plate is designed for you to weld on your own ear lugs for your specific excavator mount. The bolt pattern in the plate lines up with the bolt pattern on Baumalight attachments, allowing you to bolt the attachment in place. Turn-Key Custom Solutions A fully customized solution, the team at Baumalight designs and builds your custom excavator adaptor for your specific excavator to ensure that the attachment is ready to go to work as soon as it arrives. Blank Weld-On Plate WLD001421 Baumalight Weld On Excavator Adapter | For: S14, S16, S18 Stump Grinders $ 520.00 Add to List Turn Key Solutions Add Connection Code WL-A04 Baumalight A04 Excavator Connection Code (The Connection Plate Is 50% Of Turn Key Adaptor Price) $ 0.00 Add to List Click The Link Below To Find Your Specific D00**** Ex Mount My Baumalight Excavator Mount Add Turn Key Option That Corresponds With Your D00**** Please Note Your D00**** When Ordering The Turn Key Pricing Includes The Connection Code Price WLEXTURNKEY-CLASS5-CROSSPIN Baumalight 1.5-6T Exc TurnKey Cross Pin Mount | Include Your D00**** In Notes When Ordering $ 2,160.00 Add to List WLEXTURNKEY-CLASS5-PIN/GRABBER Baumalight 1.5-6T Exc TurnKey Pin/Grabber Mount | Include Your D00**** In Notes When Ordering $ 1,350.00 Add to List WLEXTURNKEY-CLASS5-WEDGE Baumalight 1.5-6T Exc Turn Key Wedge Mount | Include Your D00**** In Notes When Ordering $ 1,050.00 Add to List

S14 Stump Grinder | 12-30 HP | 12-22 GPM | 1-2T Ex | 18″ Rotor | 6″ Cutting Depth | S450 Mtr | Less Mount