RSX380 Screw Splitter/Stump Planer | Up To 3 Ton Ex | Max GPM 45 | Max PSI 3500

RSX380 Screw Splitter/Stump Planer | Up To 3 Ton Ex | Max GPM 45 | Max PSI 3500 Baumalight RSX380 Screw Splitter/Stump Planer | Max 3 Ton Ex | Max GPM 45 | Max PSI 3500 *PRICE DOES NOT INCLUDE SETUP OR SHIPPING – PRICED FOB BV-ATWOOD, KS *Must Add Bit(s) & Excavator Mount To Complete – See Below *Unit Does NOT Include Hoses & Couplers *The RSS380 & RSS580 Can Operate Without Case Drain If Hyd Pressure Is Under 2500 PSI. If Hyd Pressure Is Near Or May Exceed 2500 PSI, Connect Case Drain Hose On Splinter To Excavator Return To Sump / Reservoir Coupler. *The RSS780 Must Have The Case Drain Hose Connected To The Excavator Return To Sump/ Reservoir Coupler. Unit Specs Unit Features Splitter & Planer Features Flow & Pressure Specs Bits Video Excavator Mounts RSX380 Splinter’s Log Splitter tool can split pieces of wood and logs up to 12 feet or even 20 ft long. The RSX models are designed with a bolt on excavator mount, the log splitter’s power comes from the hydraulically-driven motor mounting on a planetary drive, delivering a high amount of torque to the splitting head. The bit’s bite comes from machining two helical spirals machined into two pieces of steel. The two spirals join at the hardened tip for easy boring into the log. Driven on a 2” hex shaft or flange mount with an integrated shield that protects the drive from the rigors of splitting wood, the Log Splitter tool can tear into logs either horizontally or vertically. The RSX excavator models have a Stump Planer tool that is designed to bolt on to your excavator. The RSX model operates at a low RPM so that chips are contained during the operation with very little mess to clean up. Ideal for urban areas or confined spaces, the Stump Planer requires less power as it does not produce as fine material as a high speed cutting wheel. This enables larger stumps to be ground faster with smaller carriers, creating better mulch for other small trees. The Stump Planer tool features a hardened replaceable tip for extra-long wear and sharpenable cutting blades. Specs Model RSX380 RSX580 RSX780 Excavator Adaptor Code A02 A02 A03 Splitter Tools 2″ Hex 14×8 splitter cone (D002193) 2″ Hex 14×8 splitter cone (D002193) 8-bolt flange mount 14×8 splitter cone (D003935) Adaptor Bolt on Bolt on Bolt on Carrier Weight (Max lb) 3 ton 8 ton 18 ton Rec. GPM 15-40 20-45 20-55 Max. GPM 45 45 65 Rec. PSI 2500-3000 2500-3000 2500-4500 Max. PSI 3500 3500 5000 Drive Size 2″ Hex 2″ Hex 8 Bolt Flange Drive Type Planetary Planetary Planetary Hoses Included No No No HEAVY DUTY BUILD HEAVY DUTY BUILD Features a heavy-duty encasement that locks into place for long-lasting durability. PROTECTIVE POWDER COAT FINISH PROTECTIVE POWDER COAT FINISH Heavy duty construction and a durable powder coated finish. PLANETARY DRIVE PLANETARY DRIVE Power comes from the Splinter/Planer’s hydraulically-driven planetary drive, delivering up to 3,800 ft/lbs of torque. NO 12V ELECTRIC REQUIRED NO 12V ELECTRIC REQUIRED With no extra electrical cables, connection is quick and easy. MAIN SHAFT SEAL PROTECTION MAIN SHAFT SEAL PROTECTION The Splinter/Stump Planer flange protects the main shaft seal to prevent damage to the Splinter’s bearings from possible debris. ONE PERSON MANEUVERING ONE PERSON MANEUVERING One person can handle material without coming out of cab by drilling partially into the log and then carrying it to the desired location EASY TO CHANGE BITS EASY TO CHANGE BITS Easily change from splitting to grinding. AUGER ATTACHMENT AUGER ATTACHMENT Pengo’s patented 40/50 dual angle bolt on cutting can be flipped from a 40 degree cut angle to a 50 degree cut angle for a more aggressive cut in clay and hard pack dirt. Aggressor augers also come standard with our Tri-Flow Pilot bit. The three cutting blades make it easier to start a hole and keep the bit straighter. Splitter Features SPLITTING FORCE Much higher splitting force than a cylinder splitter with the same amount of pressure. HARDENED REPLACEABLE TIP The Splinter’s entry tip if hardened for extra-long wear and replaceable for a longer life. Stump Planer Features STUMP PLANER ATTACHMENT Baumalight’s stump planer attachment operates at a low RPM so that chips are contained during the operation with very little mess to clean up. The planer’s entry tip is hardened for extra-long wear and replaceable for a longer life. The smaller leading blade is made from AR500 steel and the larger clean up blade is made with AR400 steel. Both blades can be sharpened, lowering operating costs. NO FLYING CHIPS Because the Splinter operates at a low RPM, chips are contained during operation with very little mess to clean up. IDEAL FOR URBAN AREAS The planer is ideal for urban areas and confined spaces where keeping chips contained is critical. LARGER CHIPS With less power required to produce fine material, larger stumps can be ground faster with small carriers, creating mulch for other small trees. HARDENED REPLACEABLE TIP The Splinter’s entry tip if hardened for extra-long wear and replaceable for a longer life. HEAVY DUTY SHARPENABLE BLADES The smaller leading blade is made from AR500 steel and the larger clean up blade is made with AR400 steel. All cutting blades can be sharpened, lowering costs by not replacing blades as often. Bits WLD002507 2″ Hex 14×8 Splitter Cone Assy With Replaceable Tip $ 1,199.00 Add to List WLD002771 Stump Planer | 2″ Hex | 20″ Dia | 4 Knife $ 920.00 Add to List Wear Parts WLD002506 Splinter Tip – Hardened 4140 40/50RC for D002507 & D003935 $ 360.00 Add to List WLD003508 Planer Spiral Tip | 4140 40/45RC | For: WLD002771 & WLD003381 $ 221.40 Add to List WLD003722 Baumalight Replacement Top Section Of Splitter Cone For Both D002507 & D003935 $ 691.88 Add to List WLD003930 Small Blade Assy | For: WLD002771 Planer $ 316.00 Add to List WLD004919 Baumalight 2″ Hex Splitter Cone Top Flange Bolt-On Replacement Assembly $ 252.00 Add to List Baumalight Excavator Mounting Excavator Mounting Baumalight offers two options to mount your attachment on your excavator, blank weld-on plates & turn key custom solutions. All Baumalight excavator mounting options are manufactured in Canada and our team of experts will work with you to ensure you receive the best solution for your excavator. Blank Weld-On Plates The bank weld-on plate is designed for you to weld on your own ear lugs for your specific excavator mount. The bolt pattern in the plate lines up with the bolt pattern on Baumalight attachments, allowing you to bolt the attachment in place. Turn-Key Custom Solutions A fully customized solution, the team at Baumalight designs and builds your custom excavator adaptor for your specific excavator to ensure that the attachment is ready to go to work as soon as it arrives. Blank Weld-On Plate WLD001161 Baumalight Blank Weld On Plate Without Bolts | For 1.5T To 10T Excavators $ 108.26 Add to List WLD004951 Baumalight Set Of (10) 5/8″ x 2″ G5 Bolts With Lock Nuts | FREE If Mount Is Ordered With Wholegood $ 299.70 Add to List Turn Key Solutions Add Connection Code WL-A02 Baumalight A02 Small Bolt-On Plate Connection Code (D001161) $ 0.00 Add to List Click The Link Below To Find Your Specific D00**** Ex Mount My Baumalight Excavator Mount Add Turn Key Option That Corresponds With Your D00**** Please Note Your D00**** When Ordering The Turn Key Pricing Includes The Connection Code Price WLEXTURNKEY-CLASS5-CROSSPIN Baumalight 1.5-6T Exc TurnKey Cross Pin Mount | Include Your D00**** In Notes When Ordering $ 2,160.00 Add to List WLEXTURNKEY-CLASS5-PIN/GRABBER Baumalight 1.5-6T Exc TurnKey Pin/Grabber Mount | Include Your D00**** In Notes When Ordering $ 1,350.00 Add to List WLEXTURNKEY-CLASS5-WEDGE Baumalight 1.5-6T Exc Turn Key Wedge Mount | Include Your D00**** In Notes When Ordering $ 1,050.00 Add to List

Baumalight RSX380 Screw Splitter/Stump Planer | Max 3 Ton Ex | Max GPM 45 | Max PSI 3500