FILL-RITE FUEL PUMPS

This industry standard DC pump dispenses up to 15 GPM (57 LPM). The pump weighs less than 27 pounds (12.2kg), with hose and nozzle, and has a draw that’s easy on the DC power source.

• Explosion-proof UL/cUL listed 1/4 HP motor with permanent magnet and ball bearings
• Heavy-duty switch, thermal overload protection and junction box
• Heavy-duty three-wire battery cable
• Iron rotor
• Automatic bypass valve
• Built-in strainer
• 12′ (3.7m) hose with static ground wire
• Manual nozzle with nozzle boot that protects against dirt and contamination
• 2″ threaded base for tank openings
• Corrosion-Proof adjustable section pipe
• Machined carbon vanes
• Pump may be padlocked
• No foot valve required
• UL/cUL and bears CE Marking

• Series 800C meter in gallons/liters
• Automatic nozzle
• Series 2400C, 1/4 HP, 24 Volt DC 10 Amp motor

These durable pumps will deliver up to15 GPM (57 LPM)of gas, diesel, and petroleum based products quickly, easily and safely.

• Cast iron pump housing
• 1/4 HP, 115 VAC-60Hz motor
• Automatic bypass valve
• UL/cUL listed
• 3/4″ x 12´ hose and manual nozzle
• Steel telescoping suction pipe
• Pump may be padlocked
• Explosion-proof permanent magnet motor
• 30-minute duty cycle/not for continuous operation
• Ball bearing construction, no lubrication required
• Machined carbon vanes

• Series 800C meter in gallons/liters
• Automatic nozzle
• Series FR650, 1/4 HP, 230 VAC 50Hz with 1″ hose (18 GPM/68 LPM), CE marked

• Diesel fuel, gasoline, kerosene, mineral spirits, stoddard solvent and heptane

These rugged, positive displacement, economy pumps are UL listed and deliver flow rates up to 20 GPM (76 LPM).

• Explosion-proof UL listed 1/3 HP motor (115 VAC-60Hz) with sealed bearings
• Heavy-duty switch, thermal overload protection and junction box
• Carbon rotor vanes and ceramic/ carbon seal reduce wear and repair expense
• Integral check valve with pressure relief on outlet side reduces pressure drop and improves vertical lift
• Easy removable strainer
• Automatic bypass valve
• 2″ threaded base for tank openings
• No foot valve required
• UL/cUL Listed

• Explosion-proof UL listed 1/3 HP motor (230 VAC-50/60Hz)
• Series 800C meter in gallons/liters
• Pedestal and adapter for use with underground tanks
• Automatic nozzle
• Nozzle holders for automatic nozzles

This compact, high flow, dual-action design delivers up to 20 GPM (76 LPM) per 100 strokes. Lightweight and portable, with a variety of options, these pumps meet a full range of applications. Ideal for gasoline, oil or a wide variety of approved liquids.

• Lightweight cast aluminum body
• Stainless steel inner liner
• “Easy mount” 2″ tank adapter
• Corrosion-Proof adjustable suction pipe
• Pump flow can be reversed by rotating piston 180°
• Steel yoke handle
• All models UL listed
• Anti-siphoning device
• Pump may be padlocked

• Series 800C flow meter
• Gooseneck spout and pail hook
• 8′ hose and nozzle

Fill-Rite meters provide precision and durability in a cost-effective design.The Series 800C meter’s exclusive unicast component mounting configuration assures consistency, particularly in gravity flow applications. The 800C is accurate to within ± 1% at 5 to 20 GPM (19 to 76 LPM). The easy reset register indicates product use up to 99.9 gallons or 999 liters. A master totalizer shows cumulative totals to 99,999.9 gallons/liters.

• Large, easy to read numbers
• Quick reset knob
• Flexible flow ports can be positioned vertically or horizontally
• UL/CSA listed Options
• Gallon or liter reading
• 3/4″ or 1″ ports
• Strainer for gravity-flow applications traps tank contaminants
• Teflon ® or nickel coatings increase selection of compatible fluids
• BSP threads

• Designed for metering diesel fuel, gasoline, kerosene, mineral spirits, stoddard solvent and heptane

3/4″ Inlet – If you’re looking for rugged, dependable performance with a 3/4″ inlet and 1″ leaded spout, this is the nozzle you need. For use with 1200, 700 and FR600 Series Pumps.