DEGELMAN STRAWMASTER

STRAWMASTER & STRAWMASTER 7

Tackle Straw Problems
The Degelman Strawmaster® is the revolutionary machine designed to tackle enormous straw problems. With 26 inch long tines equipped with tungsten carbide tips placed in five rows, and set in large ten foot wide by six foot deep sections, this machine is at the forefront of modern straw management. The Strawmaster® will shatter straw, control weeds, rake flax straw, and incorporate seed and chemicals.

Keeping it simple
Minimal moving parts – Minimal Maintenance
The patented spring bar technology is at the heart of every Strawmaster®. The simple torsional spring bar design is unlike other heavy harrows, Strawmaster uses a spring bar system that lets you apply downward pressure to the harrow sections as you need it. These twin spring bars allow in-cab hydraulic control by applying pressure from zero to 1900 pounds per harrow section. If you don’t need pressure, just put it in float.

Patented Torsion Technology
Simply rotate the 8″ x 8″ beam hydraulically and apply more pressure through the torsion spring bars. Strawmaster works the way you want it to.

On The Go Hydraulic Control
Optional hydraulic rephasing cylinders are available that replace our standard gear driven jacks. These cylinders help to synchronize the angle adjustment and provide consistent pressure for every section. (Available for Strawmaster 7000 standard models only)

Easy Drop-Out Tine Replacement
The tine bars easily drop out simply removing a few bolts making tine replacment faster and easier.

Exclusive Tungsten Carbide Endura-Tip
Long Life, Maximum Performance
Degelman’s tungsten carbide Endura-Tip is exclusive to Degelman Strawmasters. Significantly increasing the life and performance of your harrow bar, the tungsten carbide tipped harrow tines maintain their original length and shape, resulting in enhanced control and a more consistent field finish.

Ground Contouring
Under float or under pressure, the harrow sections are designed for flexibility. The torsion spring bars are positioned along the sides of the harrow frame providing an even distribution of pressure to the frame. The bars can then flex in response to counter pressure from the land contours with each section rising over hills and falling into hollows.

ITEM #	DESCRIPTION	WEIGHT	UNIT PRICE	30′ PRICE	50′ PRICE	70′ PRICE	82′ PRICE
Required ∙ Selection Required ∗ Optional ∘
Strawmaster Base Machine Includes DOT lights as standard equipment
DE244219	Strawmaster Base Unit		$24,390	∙	∙	∙	∙
Wing/Truss Frame
DE244045	Wing/Truss Frame – 30′	7,700 lbs	$3,435	∙
DE244046	Wing/Truss Frame – 50′	10,300 lbs	$4,200		∙
DE244047	Wing/Truss Frame – 70′	12,900 lbs	$4,950			∙
DE244048	Wing/Truss Frame – 82′	14,200 lbs	$6,930				∙
Endura Tip Tine Section
DE244915	Endura Tip Tine Section – 10′ 5/8″		$3,110	∙ (QTY 3)	∙ (QTY 5)	∙ (QTY 7)	∙ (QTY 7)
DE244920	Endura Tip Tine Section – 6′ 5/8″		$2,220				∙ (QTY 2)
Strawmaster 7 Base Machine Includes DOT lights as standard equipment
DE244754	Strawmaster 7 Base Unit – 50′	11,700 lbs	$54,845		∙
DE244755	Strawmaster 7 Base Unit – 70′	14,800 lbs	$61,915			∙
DE244758	Strawmaster 7 Base Unit – 82′	16,400 lbs	$69,035				∙
Mechanical Tine Adjustment Mechanical or Hydraulic Selection Rquired
DE243887	Mechanical Tine Adjust – 30′		$975	∗
DE244143	Mechanical Tine Adjust – 50′		$1,335		∗
DE244144	Mechanical Tine Adjust – 70′		$1,510			∗
DE244145	Mechanical Tine Adjust – 82′		$1,680				∗
StrawmasterPrice Endura-Tip w/ Mechanical Tine Adjustment				$38,130	$45,475	$52,620	$59,210
Strawmaster 7Price Endura-Tip w/ Mechanical Tine Adjustment					$56,180	$63,425	$70,715
Hydraulic Tine Adjustment Mechanical or Hydraulic Selection Rquired
DE243947	Hydraulic Tine Adjust – 30′		$4,755	∗
DE243993	Hydraulic Tine Adjust – 50′		$5,740		∗
DE243994	Hydraulic Tine Adjust – 70′		$6,860			∗
DE243995	Hydraulic Tine Adjust – 82′		$8,110				∗
StrawmasterUnit Price Endura-Tip w/ Hydraulic Tine Adjustment				$41,910	$49,880	$57,970	$65,640
Strawmaster 7Unit Price Endura-Tip w/ Hydraulic Tine Adjustment					$60,585	$68,775	$77,145
Optional
DE243074	Trailer Hitch CAT 5 Assembly		$250	∘	∘	∘	∘
DE243961C (DE243961 + DE243967)	Platform & Mounting for a Granual Applicator		$1,125	∘	∘	∘	∘
Assembly
DE244563	Mechanical Tine Angle Assembly		$1,530 NET	∗	∗
DE244564	Hydraulic Tine Angle Assembly		$2,730 NET	∗	∗
DE244569	Mechanical Tine Angle Assembly		$1,660 NET			∗
DE244570	Hydraulic Tine Angle Assembly		$3,165 NET			∗
DE244572	Mechanical Tine Angle Assembly		$1,975 NET				∗
DE244573	Hydraulic Tine Angle Assembly		$3,485 NET				∗
PRICE DOES NOT INCLUDE SETUP OR SHIPPING – PRICED FOB FACTORY UPDATED 6/1/19

TOP OF PAGE

STRAWMASTER PRO

GO PRO
In today’s farming, time is precious. We have lots of land to cover, with a relatively short growing season. Our leading farmers have been waiting for a tool to help warm the soil and promote effective seed germination. The Pro, with its incredible tine penetration, not only rakes straw, but moves ground, blackening up the field, stimulating plant growth when it’s most critical. The Strawmaster Pro is a lot more than a big harrow.

It’s clear, farms are getting bigger and so is the farmer’s work load. The Strawmaster Pro with its up to 120’ working width makes short order of just about any field. Running at speeds upwards of 12 mph, with a machine weight near 50,000lbs, equipped with our exclusive 30″ tungsten carbide Endura-Tip tines, Strawmaster Pro simply does more. More acres, more tillage, more life. To build a 120ft machine is a challenge not to be taken lightly. Degelman’s break-through development of Hydralink technology is the key that allows for frame flexibility and field contour. The Pro not only has the ability to transfer the machine weight to each tine but does so in hilly conditions

Unique Adjustment for Harrow Sections
The Strawmaster Pro is equipped with an adjusting rod and arm located on a rubber dampening system. This will allow for harrow frame sections adjustment to ensure that they are running parallel to the ground.

Patented Torsion Technology
Simply rotate the 8″ x 8″ beam hydraulically and apply more pressure through the torsion spring bars. Strawmaster works the way you want it to.

Harrowing Becomes Light Tillage
The Degelman Strawmaster Pro is a revolutionary machine designed for both straw management or light tillage applications. With 30 inch long tines placed in 4 rows, this machine is beyond any other harrow bar. The Strawmaster Pro will shatter straw, control weeds, rake flax straw, and incorporate seed and chemicals or act as light tillage.

Drop the Pin and Go
You may have noticed, Degelman has made its mark in the industry by over doing things. Making our machines big and heavy, developing practical solutions and holding tight manufacturing tolerances, simply makes Degelman machines perform better, last longer with less problems.

Zero Maintenance is our goal, which means we ask you to do two things, ‘Drop the Pin and Go.

Steerable End Wheels
Steerable end wheels allow the operator to move from transport to field position with ease.

The Alliance 328 HS (High Speed Flotation I-328) is designed with good self-cleaning characteristics, which is suitable for on and off-the-road agricultural service on trailers and implements. The high load capacity and low inflation pressure of the tire results in high degree of agricultural soil protection, as well as low rolling resistance on both, on and off-road uses. It’s strong nylon construction and compounds ensure long life.

Compact Transport
The wing back, auto fold design is incredibly stable for road transport. It incorporates an ultra low profile under 13′-ideal for clearing bridges, power-lines, and for storage. The tremendous size of the Stramwaster Pro colapses to a minimal 18′ wide while in trasport mode, ideal for moving from one location to another.

ITEM #	DESCRIPTION	WEIGHT	UNIT PRICE	80′ PRICE	100′ PRICE	120′ PRICE
Required ∙ Selection Required ∗
Strawmaster Pro Base Machine Includes DOT lights as standard equipment
DE248529	Strawmaster Pro Base Unit – 80′ 10′-5/8″ 30″ Endura Tip Tine Section	37,300 lbs	$156,165	∙
DE248530	Strawmaster Pro Base Unit – 100′ 10′-5/8″ 30″ Endura Tip Tine Section	45,900 lbs	$176,110		∙
DE248531	Strawmaster Pro Base Unit – 120′ 10′-5/8″ 30″ Endura Tip Tine Section	48,300 lbs	$184,165			∙
Assembly
DE248520	Assembly – 80′		$5,030 NET	∗
DE248522	Assembly – 100′		$5,350 NET		∗
DE248524	Assembly – 120′		$5,780 NET			∗
PRICE DOES NOT INCLUDE SETUP OR SHIPPING – PRICED FOB FACTORY UPDATED 6/1/19