CP572 Brush Mower | 3PT CAT II | 4 Blades | 82″ Path-72″ Blade Width | 50-80 HP | 540 RPM

CP572 Brush Mower | 3PT CAT II | 4 Blades | 82″ Path-72″ Blade Width | 50-80 HP | 540 RPM CP572 Brush Mower | 3PT CAT II | 4 Blades | 82″ Path-72″ Blade Width | 50-80 HP | 540 RPM PRICE DOES NOT INCLUDE SETUP OR SHIPPING – PRICED FOB BV ATWOOD, KS Specs Features Options Video Model No. CP560 CP572 Maximum Brush Size 4″ 4″ Discharge Protection Open Front with Push Bar Link Chain Curtain on Back Open Front with Push Bar Link Chain Curtain on Back Path Width 70″ 82″ Cutting Width 60″ 72″ Low Cutting Height 2.5″ 2.5″ Number of Blades 4 4 Slashes per Second 52 52 Attachment Type CAT 2 CAT 2 Quick hitch compatibility No No Maximum Engine HP 75 85 Maximum PTO HP 65 75 Minimum Carrier Weight 4000 lbs. 5000 lbs. System Protection 2-Disk Clutch 4-Disk Clutch Shipping Dimensions (LxWxH) 88″x72″x36″ 88″x72″x36″ Deck Structure 1/4″ steel 1/4″ steel Unit Weight 1600 lbs. 1900 lbs. Shipping Weight 1550 lbs. 1885 lbs. TWO CUTS PER PASS TWO CUTS PER PASS As the rotating rotor mass throws the slasher blades at small diameter trees, the blade slices small sections away as the Brush Cutt advances forward. The curved cutting tips of the slasher blades give the Brush Cutt two cuts per pass of each blade. The leading tip takes a small bite and is immediately followed by the second tip taking another bite at 26–52 slashes per second with devastating results. Available in either 2 or 4 blade configurations the Brush Cutt’s reversible/replaceable blades are made of long lasting 1/4″ AR 400 steel. GEAR BOX GEAR BOX The Brush Cutt uses a bevel gearbox capable of handling up to 90HP for final drive output. More durable than conventional direct drive setups these gearboxes prevent shocks from cutting being passed to the drive motor. CHAIN CURTAIN CHAIN CURTAIN A heavy-duty chain curtain reduces discharge of debris. Unlike traditional chain curtains, Baumalight’s Brush Cutt uses a curtain rod setup that is free of welds. This setup allows the chain to absorb the impacts and places less strain on the welded link for longer curtain life. 4-WAY MODEL 4-WAY MODEL Designed for easy service, the four-way models feature a heavy-duty rotor with four fixed extensions. Each extension is finished off with a slasher blade. This configuration is capable of providing up to 52 slashes per second. ROTOR ROTOR Using a 3/4″ top plate and a 3/8″ bottom plate this heavy duty rotor sandwiches the 4–way blade assembly in place. SHIELD SHIELD To protect the output shaft from impact or contamination caused by debris, each model of Brush Cutt is finished off with a heavy-duty output shaft shield. POWDER COATED FINISH POWDER COATED FINISH Heavy-duty construction and a durable powder-coated finish. OPEN FRONT WITH PUSH BAR OPEN FRONT WITH PUSH BAR The open front with push bar provides extra control against thick brush and the felling of trees, while the teeth hold the brush as the blades chew it up from below. WLD005723 Baumalight Tail Wheel Assy With Bracket | For CP560/CP572 | Deduct 30% If Shipped With Wholegood $ 901.13 Add to List

CP572 Brush Mower | 3PT CAT II | 4 Blades | 82″ Path-72″ Blade Width | 50-80 HP | 540 RPM