Buffalo Roller Mill / 540 PTO / Trailer / 1.35 Diff Dr. / Hyd. Inlet Auger / 4′ Dis Pan / 5 GPI

Call for Pricing

Price

Make:
Beaver Valley Supply
Model:
BU1254-4-5
Category:
Beaver Valley Supply, KwikKracker 1254, KwikKracker 1254, Roller Mill, Roller Mill, Trailer-Mounted Roller Mill

Buffalo Roller Mill / 540 PTO / Trailer / 1.35 Diff Dr. / Hyd. Inlet Auger / 4′ Dis Pan / 5 GPI Buffalo Roller Mill / 540 PTO / Trailer / 1.35 Diff Dr. / Hyd. Inlet Auger / 4′ Dis Pan / 5 GPI Overview Specs 1:1 Drive Vs Differential Drive Henke Buffalo KwikKracker 1254 Roller Mills 12″ Roll Diameter 54″ Roll Length Up To 4,500 BPH / 126 TPH Corn Capacity 1.35 O.D. Differential Drive 540 PTO Drive Kit (80-150 HP Min.) W/Shield/Mtg. Kit Trailer Inlet Auger Low Profile Hopper (13″ x 15′) W/Hyd. Drive & Lift Auger Pan Discharge | Extends 4′ Past The End Of The Mill Options Or In Lieu Of 1000 RPM PTO Electric Drive Safety Chain Kit For Trailer Various Groove Patterns (Call For More Info) 1:1 Drive Ratio High Moisture Grain Kit 100 Bu Inlet Hopper 18″ x 8′ Conveyor Discharge 14″ Folding Auger Discharge | 12’6″ Discharge Height Stationary Mount Henke Buffalo KwikKracker Roller Mills Built with the operator in mind, our Roller Mills are easy to adjust, easy to operate and easy to maintain. Capacities: 700 to over 4500 bushels per hour – among the highest capacity on the market Easy-adjustment lever for setting the rolls for coarse or fine crack Each Roller Mill comes with magnets as standard equipment on the inlet hopper to prevent metallic debris from getting into the gain Rolls are heat-treated to Rockwell C-62 – some of the hardest in the industry Henke Roller Mills come in a wide variety of roll sizes from 18″ to 54″ in length Easy access shields for ease in service and maintenance Standard one-to-one ratio drive produces a finished product with minimum fines; optional differential drive is also available for a finer rolled finished product Two-high Roller Mills are available featuring coarse-corrugated top rolls and fine-corrugated bottom rolls to allow for additional particle size reduction Trailer-mounted models allow conveniently moving the mill to various processing sites Stationary-mounted models allow permanent installation BPH = Bushels Per Hour TPH = Tons Per Hour *Corn based on coarse-cracked, dry, shelled corn (except for the ear corn mill) **Grinding based on dry, shelled corn and using a differential drive. The primary difference between a 1:1 roller mill and a differential drive roller mill lies in the roll speeds and the resulting material processing method: 1:1 Mill (Even Speed): Both rolls in a pair rotate at the same speed , providing a consistent, uniform crush primarily through compression . This is ideal for applications like crimping grain for livestock feed where a consistent crush profile and preservation of the grain structure are important. Differential Drive Mill (Different Speeds): One roll rotates faster than the other, introducing a significant amount of shearing action in addition to compression. This shearing is used for a finer, more aggressive grind, suitable for processing certain types of feed where a smaller, more uniform particle size is desired. Feature 1:1 Roller Mill Differential Drive Mill Roll Speeds Both rolls operate at the same speed (1:1 ratio). One roll turns faster than the other (e.g., a 1:1.4 ratio). Primary Action Cracking or crimping. Shearing and grinding. Resulting Product Coarser, cracked grain with a low level of fines. Finer, more uniform particle size. Best Use Case Used when a coarser particle size is desired for ruminant digestion (cattle, beef). Used when a finer, more consistent grind is needed, such as for high-moisture corn, pelleted feeds, or for swine and poultry diets. Capacity Generally has a higher processing capacity for the same size mill when running dry grain. May have a lower capacity compared to a 1:1 mill when processing the same volume of product, but achieves a finer grind.

Henke Buffalo KwikKracker 1254 Roller Mills

Similar Products

Buffalo KwikKracker 727 Roller Mill | Elec Dr | 7×27 Rolls | 900 BPH | 5 GPI

Buffalo KwikKracker 727 Roller Mill | Elec Dr | 7×27 Rolls | 900 BPH | 5 GPI

Call for Pricing
Buffalo KwikKracker 727 Roller Mill | Elec Dr | 7×27 Rolls | 900 BPH |...
Buffalo Roller Mill / 540 PTO / Trailer / 1.35 Diff Dr / Hyd. Inlet Auger / 18′ Conveyor Dis / 5 GPI

Buffalo Roller Mill / 540 PTO / Trailer / 1.35 Diff Dr / Hyd. Inlet Auger / 18′ Conveyor Dis / 5 GPI

Call for Pricing
Buffalo Roller Mill / 540 PTO / Trailer / 1.35 Diff Dr / Hyd. Inlet Au...