Beaver Valley Supply HSRM7117

Roller Mixer | 135 Bu.-167 Cu. Ft. | 18″x16″ Cast Rolls | 6 GPI |8″x12′ Unloading Auger | 540 PTO Roller Mixer | 135 Bu.-167 Cu. Ft. | 18″x16″ Cast Rolls | 6 GPI |8″x12′ Unloading Auger | 540 PTO Back Freight: $1,495 Features Specs Options (Not Required) Video Features 167 Cu. Ft. / 135 Bu Capacity 14″ Mixing Auger With Self-Aligning 30″ Base Independent Mixer Drive 18″ x 16″ Diameter Chill Cast Rolls With 6 GPI (Grooves Per Inch) Are Standard (4,5,8,10,12, Or 15 GPI Rolls Can Be Special Ordered) Quick Change Worm Drive Roll Adjustment Leaf Spring Roll Protection Top Hopper With Grate Magnet To Remove Any Metal That May Accidentally Mix With The Material Entering The Mill. 540 PTO Shear Bolt Protection On The Mixing Auger & Transfer Auger Drive Self-Contained Hyd System With 15 Gallon Reservoir & Filter Side Supplement Hopper With Sack Cutter 240-Degree Swing | 12′ Discharge Auger | (2) Tractor Remotes (1 For Swing – 1 For Lower / Raise) 8″ x 12′ Unloading Auger Length (Standard) Weigh Bars/ Spindles Scale System (Excluding Monitor) Front & Side Scale Mount Location Non-Slip Ladder Overload Protection Release Top Tank Door 12.5L x 15 20 Ply Tires Fenders Jack Transport lights & Power Cord RM7117 ROLLER MIXER TANK CAPACITY-BUSHEL 135 TANK CAPACITY-CUBIC FT. 167 TANK DIAMETER 74″ DIAMETER OF MIXING AUGER 14″ Diameter w/30″ Base LADDER Foldable Rear Mount Non-Slip TANK WINDOWS 5-Port Hole Style OVERALL HEIGHT 10′ 8″ OVERALL WIDTH N/A OVERALL LENGTH 15′ GROUND CLEARANCE 12″ SUPPLEMENT HOPPER Side Mounted | Optional Rear Hopper FEEDER Standard Gravity Hopper | Optional Swinging Intake Augers PTO DRIVE 540 RPM H.P. REQUIREMENT 540 RPM up to 125 HP TIRES 12.5L – 15 – 20 Ply JACK Standard WEIGHT N/A DRIVE SYSTEM SELF-CONTAINED Includes Pump, 15 Gallon Reservoir w/Filter and Pressure Relief Valve PUMP PRESSURE 3,200 PSI Maximum OIL FLOW 12 G.P.M. DISCHARGE AUGER SYSTEM UNLOADING AUGER TUBE DIAMETER 8″ UNLOADING AUGER LENGTH 12′ UNLOADING AUGER ROTATION 240 Degrees UNLOADING AUGER REACH STANDARD Approx. 19′ at 53 Degrees UNLOADING AUGER W/3′ EXTENSION Approx. 21′ 6″ at 53 Degrees UNLOADING AUGER W/6′ EXTENSION Approx. 23′ 10″ at 53 Degrees ROLLER MILL SPECIFICATIONS Rolls 2 – 18″ Wide x 16 Diameter Chill Cast Rolls Roll Drive 540 RPM Direct Grooves Per Inch (GPI) Choice of 4, 5, 6, 8, 10, 12 or 15 GPI Rolls Roll Protection Leaf Spring Magnets Top Hopper w/Grate Magnet HSGMOSIA HSGMOIAIC HSGMORSH HSGMORSHIC HSGMOBSSCL HSGMOPRMSCL HSGMOEXT3 HSGMOEXT6 HSGMOEXTIC HSSC30000 ______________________________________________________________________________________________________________________________________________________________________________________________________ Back Freight: $1,495 PRICES DO NOT INCLUDE SHIPPING OR SETUP – PRICED F.O.B. FACTORY

Category: Roller Mixer