Beaver Valley Supply HSHD8117

HD II Rake | 17 Wheels-60″ | Rubber Teeth | Variable Adj. Raking Wheel Angle HD II Rake | 17 Wheels-60″ | Rubber Teeth | Variable Adj. Raking Wheel Angle Specs Features 20 Wheel Option Replacement Parts 17 Wheels WHEEL DIAMETER 60″ TEETH PER WHEEL 38 TEETH Rubber Mounted in a set of 2 TRANSPORT WIDTH 12′ 3″ TRANSPORT LENGTH 28′ 3″ MAXIMUM RAKING WIDTH 30′ 3″ RAKE WHEEL HUBS TAPERED BEARINGS HITCH JACK STANDARD TAIL & WORK LIGHTS STANDARD TIRES 9.5L X 15SL 20 Wheels WHEEL DIAMETER 60″ TEETH PER WHEEL 38 TEETH Rubber Mounted in a set of 2 TRANSPORT WIDTH 13′ 3″ TRANSPORT LENGTH 32′ 9″ MAXIMUM RAKING WIDTH 34′ 3″ RAKE WHEEL HUBS TAPERED BEARINGS HITCH JACK STANDARD TAIL & WORK LIGHTS STANDARD TIRES 9.5L X 15SL HDII Rakes H&S HDII Rakes 5″ x 7″ Overhead Mainframe Each side opens independently. The windrow width on the HDII can be adjusted hydraulically to a maximum of 72″. One hydraulic remote along with the electrical control box, controls all the functions of the rake. Because of the offset of the rake wheel beams, there is no need for center kicker wheels. Rake wheel ground pressure can be adjusted by the threaded rod and nut on the end of the lifting pipes on each rake beam. The 60″ rake wheels on the HDII rake feature UV treated poly wind panels and an over center wheel stop. Torsional dampening springs allow the rake wheels to roll smoothly over the terrain. The rake wheel lift pipes slide in oil impregnated bronze bushings and also feature a rake wheel lock for transportation. The HDII rake features rake beams with a variable adjustment to set the rake wheels straight or in a tilted setting up to 10 degrees. (patented) Anti-wrap hay guards are standard equipment. The rake wheels may be lifted independently left or right or both at the same time with the master switch. An adjustable hitch and jack are standard equipment. Control Box Road Lights Torsional Dampening Springs Rake Beams Tapered Roller Bearings Work Lights To Make A 20 Wheel Rake Must Add Items Below Note: Will Work For 2011 Production Model Year & Up (Will NOT Work With Prior Model Years) HSHDOFNT H&S 2 Wheel Add-On Kit (For The Front Of Each Beam) | Increases Raking Width 36″ | For HD II Rakes $ 6,012.00 Add to List HSHDOREAR H&S HDII Single Wheel Rear Extension Kit | Increases Raking Width 12″ | Decreases Windrow Width 6″ $ 3,535.00 Add to List HSHD118 H&S HDII 60″ Wind Guard | 47″ Diameter | 1/8″ Thick $ 154.82 Add to List HSHD203 H&S Complete LH Rake Wheel W/ Windguard | For HDII & HC7116 $ 1,058.85 Add to List HSHD204 H&S Complete RH Rake Wheel With Windguard | For HDII & HC7116 $ 825.84 Add to List RE352052 Double Rubber Rake Tooth | Wheel Rakes (Gold Series) | (18) On Each HDII Wheel $ 10.00 Add to List

Category: Rakes