Beaver Valley Supply HSHC4112

H&S HC4112 Hi Capacity Bi-Fold Rake | Single Axle | 12 Wheels-55″ | Up To 24′ Raking Width H&S HC4112 Hi Capacity Bi-Fold Rake | Single Axle | 12 Wheels-55″ | Up To 24′ Raking Width Specs Features Options Video 4112 NUMBER OF WHEELS 12 WHEEL DIAMETER 55″ TEETH PER WHEEL 40 TOOTH DIAMETER 7mm TRANSPORT WIDTH 8′ 6″ TRANSPORT LENGTH 24′ 6″ WINDROW WIDTH ADJUSTMENT 38″- 58″ RAKING WIDTH UP TO 24′ HYD. SET. RAKING WHEEL HUBS TAPERED BEARINGS WING FLEX 3′ UP OR DOWN NUMBER OF TRANSPORT WHEELS 4 HITCH JACK STANDARD CENTER KICKER WHEELS OPTIONAL GAUGE WHEELS 15″ TRANSPORT WHEELS 15″ WEIGHT 3500 LBS. 4114 NUMBER OF WHEELS 14 WHEEL DIAMETER 55″ TEETH PER WHEEL 40 TOOTH DIAMETER 7mm TRANSPORT WIDTH 8′ 6″ TRANSPORT LENGTH 27′ 3″ WINDROW WIDTH ADJUSTMENT 38″- 58″ RAKING WIDTH UP TO 28′ HYD. SET. RAKING WHEEL HUBS BALL BEARINGS WING FLEX 3′ UP OR DOWN NUMBER OF TRANSPORT WHEELS 6 HITCH JACK STANDARD CENTER KICKER WHEELS OPTIONAL GAUGE WHEELS 15″ TRANSPORT WHEELS 15″ WEIGHT 3800 LBS. 4116 NUMBER OF WHEELS 16 WHEEL DIAMETER 55″ TEETH PER WHEEL 40 TOOTH DIAMETER 7mm TRANSPORT WIDTH 8′ 6″ TRANSPORT LENGTH 30′ 3″ WINDROW WIDTH ADJUSTMENT 38″- 58″ RAKING WIDTH UP TO 32′ HYD. SET. RAKING WHEEL HUBS BALL BEARINGS WING FLEX 3′ UP OR DOWN NUMBER OF TRANSPORT WHEELS 6 HITCH JACK STANDARD CENTER KICKER WHEELS OPTIONAL GAUGE WHEELS 15″ TRANSPORT WHEELS 15″ WEIGHT 4200 LBS. Raking Width Front : 0 to 24′ Back: 38″ to 58″ Features Raking wheels positioned ahead of the rake arms, main frame beams and transport wheels. Coupled with a high and wide end of frame there are no hang-up points or restrictions when raking the heaviest of hay crops. Windrow width adjustment is done with a hand crank. Rake opens and closes hydraulically, rake wheels are lowered and raised hydraulically, and the rake wheels float independently. The rake arms on the 14 and 16 wheel hi-capacity rakes feature 2 roller bearings on each end of the arm for long life, smooth operation and less wear than rakes with bushings. Hi-Capacity rakes fold up to 8′ 6″ or less with the touch of a lever for road transport or to go through gates. Limited oscillating offset tandem transport wheels assure a smooth, level ride, even over irrigation tracks. Standard on the 14 & 16 wheel models and optional on the 12 wheel model. An adjustment for the ground pressure on the rake wheels allows the operator to fine tune the 12, 14 and 16 wheel Hi-Capacity rakes to fit varying conditions. An adjustable brake band on top of the front spindle keeps the front gauge wheels from spinning in rough conditions. HSBFO2-12HC H&S Center Kicker Wheels (2) With Hyd Lift | For All SN’s Of BF12HC Rakes & 4112 Rakes $ 3,315.00 Add to List HSBFO6 H&S Set Of Tandem Rear Wheels | For: HC4112 $ 1,988.00 Add to List HSBFO8 Transport Lighting | For HC Rakes (Specify Model) $ 1,259.00 Add to List HSBFOWP55 Wind Panel Kit for 55″ Wheel 31-1/2″ $ 47.00 Add to List HSBFR31 H&S 55″ RH Replacement Rake Wheel $ 135.00 Add to List HSHCOLIGHT H&S Tailight Kit | For 12 Wheel HC Rakes (Dealer Install) $ 906.00 Add to List HSSC10100 H&S Safety Chain Kit | 10, 100 lbs. Capacity $ 94.00 Add to List HST174 H&S 55″ LH Replacement Rake Wheel $ 135.00 Add to List HST176 H & S 55″ Rake Wheel Tooth {EACH} {OT-1A} | Packed In Bundles Of 40 $ 2.25 Add to List

Category: Hay Rake