Beaver Valley Supply DA230459

Danuser MAC Bucket Hopper Extension | Extends Capacity From 1/2 Yard To 3/4 | Includes Hardware Danuser MAC Bucket Hopper Extension | Extends Capacity From 1/2 Yard To 3/4 | Includes Hardware PRICE DOES NOT INC L UDE SETUP OR SHIPPING – PRICED FOB FACTORY Assembly Assembly & Installation Recommended Tools & Materials • 1/2” wrench • 1/2” socket • Ratchet • Vise grips • Hammer • Caulk gun • General purpose silicone caulk STEP 1: Park the vehicle on level ground, and rest the MAC Bucket on a solid, level surface. STEP 2: Shut off the vehicle, and relieve all hydraulic pressure. STEP 3: Remove packing material from the hopper extension. STEP 4: Disengage the four (4) hinge pins, and remove the safety grate: A: Turn Pins Upward B: Pull Pins C: Turn Pins Downward D: Remove Safety Grate STEP 5: Relocate the safety grate atop the hopper extension, and secure with the hopper extension hinge pins. STEP 6: Using a pair of vise grips and a hammer, remove the roll pins from all four (4) MAC Bucket hinge pins. Remove the hinge pins and discard. STEP 7: Clean the top flange of the MAC Bucket. STEP 8: Run a small bead of silicone caulk on the top flange of the MAC Bucket to create a watertight seal between the MAC Bucket and the hopper extension. STEP 9: With the help of a second person, position the hopper extension onto the MAC Bucket. STEP 10: Using the hardware provided, install the bolts, washers, and nuts. Leave handtight until all 16 bolts are installed. STEP 11: Using a 1/2” wrench and ratchet with a 1/2” socket, tighten all 16 bolts and nuts.

Category: Bucket Attachments