Beaver Valley Supply DA21006L

Danuser LM40 Hammer | Post Driver | Universal Skid Front End Loader Mount | Loaded Danuser Hammer LM40 | Universal Skid Front Loader Offset Mount | Loaded | 12-30 GPM | Drives Up 8.5″ x 9.25″ Posts PRICE DOES NOT INCLUDE SETUP OR SHIPPING – PRICED FOB FACTORY *Recommended 75 HP + Tractors. DO NOT Exceed The Tractor Loader Rated Operating Capacity. Use Sufficient Counterweights. *96″ Hoses & Flat Face Couplers Included. See Options For “Front End Loader Hose Kit” To Connect To Rear Tractor Remotes. Overview Specs Options Wiring Harnesses For Tilt Opt Video Unit Includes 96″ Hoses With FF Couplers Factory Installed Additional Weight Kit Danuser Hammer Model SM40 has a 40” drop hammer design with up to 35 strokes per minute. With this innovative design, you can achieve a full stroke with every cycle or utilize the short stroke feature to fine tune your depth. The Hammer DOES NOT operate with springs, hydraulic cylinder, or return line. Grapple option can be added to any model for a true one-person operation (does not include t-posts). The grapple option will allow the operator to grab the post off the ground, load it into the machine, and drive it in the ground without leaving the skid-steer seat. Tilt option allows up to 20˚ in each direction. The hammer weight is 300 lbs. from the factory. Additional weight can be added for a total of 500 lbs. The unit also has an i ntegrated post puller to be used with log chain. NOTE: If post/pipe diameter is 5″ or smaller and you have a helper, PN 21395 Donut Strike Plate must be purchased separately. If driving with one person, PN 21212 Horseshoe Strike Plate is a better option. Unit Drives Fence Posts Sign Posts Guard Rails Median Dividers Tent Stakes T-Posts Pipe Fence Railroad Ties Post Dimensions: T-post to RR Tie Impact Force: 82,000 lbs. Length of Stroke: 40 Hammer Weight: 300 Strokes per Minute: 35 Model LM40 Model LM40 w/ Grapple Overall Length 45.5″ Overall Width 25″ Overall Height 64″ Tilt (side-side) N/A Machine Weight 946 lbs (1,146 lbs w/ additional weight) 986 lbs (1,186 lbs w/ additional weight) Hammer Weight 300 LBS (500 LBS MAX) Length of Stroke 40″ Max. Strokes per Minute 35 Hydraulic Requirements 1500-3000 PSI *12-30 GPM Tractor Requirements 75 HP minimum Maximum Post Width 8.5″ x 9.25″ Impact Force 82,000 lbs @ 500 lb weight Impact Energy 1,025 ft-lbs @300 lb weight; 1,709 ft-lbs @ 500 lb weight *Hammer will still operate on machines with less than 12 GPM with fewer strokes per minute. DA180005 Danuser 4″ Square Plate | Recommended For Driving 4″ Square Wood Posts $ 87.00 Add to List DA180007 Danuser 6″ Square Plate | Recommended For Driving 6″ Square Wood Posts $ 87.00 Add to List DA186065 Danuser 24″ Hose Extension Kit $ 70.00 Add to List DA196056 Danuser Front-End Loader Hose Kit | 1/2″ X 25′ Hoses | 1/2″ ISO FF Couplers | ISO 7241Couplers $ 482.00 Add to List DA21014 Danuser EM40/LM40 Grapple (Add On) $ 828.00 Add to List DA21015 Danuser LM40 Tilt (Add On) $ 2,662.00 Add to List DA21149 Danuser T-Post Adapter | For Hammers & Hornets | Must Add DA220011 If Working With Domed Tool $ 173.00 Add to List DA21212 Floating Horseshoe Striker Plate | For Driving Smaller Diameter Pipe (Less Than 4″ O.D.) $ 87.00 Add to List DA21278 Danuser Hammer Concrete Breaker Kit | Breaks Up To 9″ Thick Reinforced Concrete $ 2,467.00 Add to List DA21280 Danuser Guard Rail Plate | Recommended When Driving 6″ Or 8″ I Beams $ 100.00 Add to List DA21395 Danuser 5″ Donut Plate | Keeps The Pipe Centered When Driving In Difficult Conditions $ 87.00 Add to List Aux Wiring Harnesses Add An Optional Wiring Harness To Allow The Optional Tilt Function To Operate From The Vehicle Joystick Controls. Wiring Harnesses Replace The Cigarette Lighter Plug On The Hammer Standard Harness. All Wiring Harnesses Are 12″ In Length ** Requires Connector Contacts Be Installed In A Switchable +12V Pin Location & Ground Pin Location. Mapping Of Tractor Connector Pins Required. Battery Wiring Harness Connect To Your Vehicle Battery To Supply Power For The Optional Tilt Function. This Replaces The Cigarette Lighter Plug On The Hammer Standard Harness. DA21220-1 Danuser 8-Pin Wiring Harness | For: ASV, Cat, Komatsu, & Terex $ 192.00 Add to List DA21220-2 14-Pin Wiring Harness | Used On:Bobcat (Prior to 99′),Case,Kubota,New Holland,Takeuchi,JCB, & Volvo $ 192.00 Add to List DA21220-3 Danuser 14-Pin Wiring Harness | Used On: John Deere $ 192.00 Add to List DA21220-4 Danuser 14-Pin Wiring Harness | Used On: Caterpillar $ 192.00 Add to List DA21220-5 Danuser 14-Pin Wiring Harness | Used On: Bobcat (99′ To Current) & Gehl $ 192.00 Add to List DA21220-U1 Danuser 8-Pin Universal Wiring Harness ** $ 192.00 Add to List DA21220-U2 Danuser 14-Pin Universal Wiring Harness ** $ 192.00 Add to List DA21253 Danuser Wiring Harness – Connects to Battery $ 63.00 Add to List

Category: Universal Skid Loader Mount Post Drivers