8″ X 16′ Westfield Utility Auger

8″ X 16′ Westfield Utility Auger Westfield 8″ X 16′ Utility Auger – Upper Basic Section To Complete Unit, Add Drive – See Below Overview Specs Ideal Uses Parts Flight Speed Calculator Drives Accessories Shipped Complete With Power Head Motor Mounting Brackets Tail Cage 12.7″ Double Pulley Two Belts Pulley Shield Outlet Spout Flighting Recommended Pulley Size: 3¼” – 3½” Double Groove Note: Recommended Pulley Sizes Are For 1750 RPM Motors For Intermittent Feed: A Slightly Smaller Pulley Will Allow Easier Startup Under Load. Ideal Uses At your grain bins or bulk tanks In drying set-ups Around the dairy barn In feedlots At feedmills or elevators For permanent or semi-permanent auger installations Can be used at grain bins or bulk tanks @media (max-width:480px){#cp_calculatedfieldsf_pform_8{min-height:614px;}}@media (max-width:768px){#cp_calculatedfieldsf_pform_8{min-height:456px;}}@media (max-width:1024px){#cp_calculatedfieldsf_pform_8{min-height:530px;}}@media (min-width:1024px){#cp_calculatedfieldsf_pform_8{min-height:797px;}} function doValidate_8(form, validation_only) { validation_only = validation_only || false; window[‘cff_enabling_form’ ] = function(_form){ if(!(_form instanceof $dexQuery)) _form = $dexQuery(_form); _form.validate().settings.ignore = ‘.ignore,.ignorepb’; _form.removeData(‘being-submitted’); _form.find(‘.submitbtn-disabled’).removeClass(‘submitbtn-disabled’).prop(‘disabled’, false); _form.find(‘.cff-processing-form’).remove(); }; window[‘cff_disabling_form’] = function(_form){ if(!(_form instanceof $dexQuery)) _form = $dexQuery(_form); if(cff_form_disabled(_form)) return; _form.find(‘.pbSubmit,:submit’).addClass(‘submitbtn-disabled’).prop(‘disabled’, true); _form.data(‘being-submitted’,1); var d = document.createElement(‘div’); $dexQuery(d).addClass(‘cff-processing-form’).appendTo(_form.find(‘#fbuilder’)); }; window[‘cff_form_disabled’ ] = function(_form){ if(!(_form instanceof $dexQuery)) _form = $dexQuery(_form); return (‘undefined’ != typeof _form.data(‘being-submitted’)); }; var form_identifier = ‘_8’; if(typeof cpcff_validation_rules == ‘undefined’) cpcff_validation_rules = {}; if(typeof cpcff_validation_rules[form_identifier] == ‘undefined’) cpcff_validation_rules[form_identifier] = {}; var $dexQuery = (fbuilderjQuery) ? fbuilderjQuery : jQuery.noConflict(), _form = $dexQuery(“#cp_calculatedfieldsf_pform”+form_identifier), form_disabled = function(){cff_form_disabled(_form);}, disabling_form = function(){cff_disabling_form(_form);}, enabling_form = function(){cff_enabling_form(_form);}; if(form_disabled()) return false; _form.find(‘[max=””]’).removeAttr(‘max’); _form.find(‘[min=””]’).removeAttr(‘min’); _form.find(‘[step=””]’).removeAttr(‘step’); _form.validate().settings.ignore = ‘.ignore’; var cpefb_error = !_form.validate().checkForm(); var validation_rules = cpcff_validation_rules[form_identifier], processing_form = function() { var recaptcha = $dexQuery( ‘[name=”cp_calculatedfieldsf_pform_8″] [name=”g-recaptcha-response”]’ ); if( recaptcha.length == 0 || /^s*$/.test( recaptcha.val() ) ) { disabling_form(); var grecaptcha_e = $dexQuery( ‘[name=”cp_calculatedfieldsf_pform_8″] .cff-recaptcha’ ); if(grecaptcha_e.length && grecaptcha_e.attr( ‘data-size’ ) == ‘invisible’) { grecaptcha.execute(); if(grecaptcha.getResponse() == ”) { enabling_form(); return false; } } else { alert(‘Please enter the captcha verification code.’); enabling_form(); return false; } } if ( ‘extra_validations’ in $dexQuery.fbuilder && Object.prototype.toString.call($dexQuery.fbuilder.extra_validations) === ‘[object Object]’ ) { for (let i in $dexQuery.fbuilder.extra_validations) { if ( typeof $dexQuery.fbuilder.extra_validations[i] == ‘function’ && !$dexQuery.fbuilder.extra_validations[i](form, validation_rules, processing_form) ) { enabling_form(); return false; } } } for(var rule in validation_rules) { if(!validation_rules[rule]) { $dexQuery(form).trigger(‘cff-form-validation’, false); return; } } if ( validation_only ) { $dexQuery(form).trigger(‘cff-form-validation’, true); return; } _form.find(“[name$=’_date’][type=’hidden’]”).each(function(){ var v = $dexQuery(this).val(), name = $dexQuery(this).attr( ‘name’ ).replace(‘_date’, ”), e = $dexQuery(“[name='”+name+”‘]”); if( e.length && ! $dexQuery(“[id='”+name+”_datepicker_container’]”).length ){ e.val( String( e.val().replace( v, ” ) ).trim() ); } }); _form.find(“select option[vt]”).each(function(){ var e = $dexQuery(this); e.attr(‘cff-val-bk’, e.val()).val(cff_sanitize(e.attr(“vt”), true)); }); _form.find(“input[vt]”).each(function(){ var e = $dexQuery(this), q = $dexQuery(‘[id=”‘+e.attr(‘id’)+’_quantity”]’); e.attr(‘cff-val-bk’, e.val()).val(cff_sanitize(e.attr(“vt”), true)+(q.length ? ‘ (‘+Math.max(1, q.val())+’)’ : ”)); }); _form.find(‘.cpcff-recordset,.cff-exclude :input,[id^=”form_structure_”]’) .add(_form.find( ‘.ignore’ )).attr(‘cff-disabled’, 1).prop(‘disabled’, true); disabling_form(); if ( _form.attr( ‘target’ ) == undefined && window.self !== window.top ) { _form.attr( ‘target’, ‘_top’ ); } if ( _form.attr( ‘target’ ) != undefined && NOT( IN( _form.attr( ‘target’ ).toLowerCase(), [ ‘_blank’, ‘_self’, ‘_top’, ” ] ) ) ) { let loadHandler = function(){ if ( $processed_flag ) return; $processed_flag = true; _form.find(‘[cff-val-bk]’).each(function(){ var e = $dexQuery(this); e.val(e.attr(‘cff-val-bk’)).removeAttr(‘cff-val-bk’); }); _form.find(‘[cff-disabled]’).prop(‘disabled’, false).removeAttr(‘cff-disabled’); if(!/^(s*|_self|_top|_parent)$/i.test(_form.prop(‘target’))) { enabling_form(); } $dexQuery(document).trigger(‘cff-form-submitted’, _form); }, $iframe = $dexQuery(‘[name=”‘+_form.prop( ‘target’ )+'”]’), $processed_flag = false; if ( $iframe.length ) { $iframe.off(‘load.cff-form-submission’).on(‘load.cff-form-submission’, loadHandler); setTimeout(function() { $iframe.off(‘load.cff-form-submission’); loadHandler(); }, 3000); } } if(‘nativeSubmit’ in _form[ 0 ]) _form[ 0 ].nativeSubmit(); else _form[ 0 ].submit(); }; try{ _form.find(‘[name=”cp_ref_page”]’).val(parent.window.document.location.href); } catch (err) { _form.find(‘[name=”cp_ref_page”]’).val(document.location.href); } validation_rules[‘fields_validation_error’] = (cpefb_error==0); /* 1: Do not submit if the equations are being evaluated */ validation_rules[‘no_pending’] = (!(form_identifier in $dexQuery.fbuilder.calculator.processing_queue) || !$dexQuery.fbuilder.calculator.processing_queue[form_identifier]) && !$dexQuery.fbuilder.calculator.thereIsPending(form_identifier); if(!validation_rules[‘no_pending’]) { $dexQuery(document).on(‘equationsQueueEmpty’, function(evt, formId){ if(formId == form_identifier) { $dexQuery(document).off(‘equationsQueueEmpty’); validation_rules[‘no_pending’] = true; processing_form(); } }); } /* End :1 */ if (validation_rules[‘fields_validation_error’]) { processing_form(); } else { _form.valid(); var page = _form.find(‘.cpefb_error:not(.message):not(.ignore):eq(0)’).closest(‘.pbreak’).attr(‘page’)*1; gotopage(page, _form); // Check if the field is inside a popup. _form.find(‘.pbreak:visible .cpefb_error:not(.message):not(.ignore)’).each(function(){ let p = $dexQuery(this).closest(‘.cff-popup-field’); if(p.length > 0) { SHOWFIELD(p); } let f = $dexQuery(this).closest(‘.cff-collapsed’); if(f.length > 0) { f.removeClass(‘cff-collapsed’); } }); _form.trigger(‘cff-form-validation’, false); enabling_form(); setTimeout(function(){$dexQuery.fbuilder.openErrorDlg(_form);},50); } return false; } form_structure_8=[[{“form_identifier”:””,”name”:”fieldname2″,”shortlabel”:””,”index”:0,”ftype”:”fnumber”,”userhelp”:””,”userhelpTooltip”:false,”tooltipIcon”:false,”csslayout”:””,”title”:”Motor Pulley Diameter (Inches)”,”predefined”:””,”predefinedClick”:false,”required”:false,”exclude”:false,”readonly”:false,”numberpad”:false,”size”:”small”,”thousandSeparator”:””,”decimalSymbol”:”.”,”min”:””,”max”:””,”formatDynamically”:false,”dformat”:”number”,”formats”:[“digits”,”number”,”percent”],”fBuild”:[],”parent”:””},{“form_identifier”:””,”name”:”fieldname3″,”shortlabel”:””,”index”:1,”ftype”:”fnumber”,”userhelp”:””,”userhelpTooltip”:false,”tooltipIcon”:false,”csslayout”:””,”title”:”Auger Pulley Diameter (Inches)”,”predefined”:””,”predefinedClick”:false,”required”:false,”exclude”:false,”readonly”:false,”numberpad”:false,”size”:”small”,”thousandSeparator”:””,”decimalSymbol”:”.”,”min”:””,”max”:””,”formatDynamically”:false,”dformat”:”number”,”formats”:[“digits”,”number”,”percent”],”fBuild”:[],”parent”:””},{“form_identifier”:””,”name”:”fieldname4″,”shortlabel”:””,”index”:2,”ftype”:”fnumber”,”userhelp”:””,”userhelpTooltip”:false,”tooltipIcon”:false,”csslayout”:””,”title”:”Motor RPM | Gas Motor RPM=3,000 Electric Motor RPM=1,750″,”predefined”:””,”predefinedClick”:false,”required”:false,”exclude”:false,”readonly”:false,”numberpad”:false,”size”:”small”,”thousandSeparator”:””,”decimalSymbol”:”.”,”min”:””,”max”:””,”formatDynamically”:false,”dformat”:”number”,”formats”:[“digits”,”number”,”percent”],”fBuild”:[],”parent”:””},{“dependencies”:[{“rule”:””,”complex”:false,”fields”:[“”]}],”form_identifier”:””,”name”:”fieldname1″,”shortlabel”:””,”index”:3,”ftype”:”fCalculated”,”userhelp”:””,”userhelpTooltip”:false,”tooltipIcon”:false,”csslayout”:””,”title”:”Calculated Flight Speed | Total Formula – (Motor Pulley/Auger Pulley) x Motor RPM = Flight Speed”,”predefined”:””,”required”:false,”exclude”:false,”size”:”small”,”eq”:”(fieldname2/fieldname3)*fieldname4″,”min”:””,”max”:””,”suffix”:””,”prefix”:””,”decimalsymbol”:”.”,”groupingsymbol”:””,”readonly”:true,”currency”:false,”noEvalIfManual”:true,”formatDynamically”:false,”hidefield”:false,”fBuild”:[],”parent”:””}],{“0”:{“title”:”Auger Flight Speed Calculator “,”description”:”Use The Calculator Below To Determine Your Optimal Flight Speed”,”formlayout”:”top_aligned”,”formtemplate”:”cp_cff_13″,”evalequations”:1,”evalequationsevent”:2,”loading_animation”:0,”autocomplete”:1,”persistence”:0,”animate_form”:0,”customstyles”:””},”formid”:”cp_calculatedfieldsf_pform_8″,”setCache”:false,”cache”:false}]; Payment options Submit Electric Drive Must Add Motor, Pulley, & Bushing If Needed – Recommended Pulley Size: 3¼” – 3½” Double Groove Note: Recommended Pulley Sizes Are For 1750 RPM Motors Electric Motor (Must Add) DY36VF28 Dayton 3 HP Electric Motor | 3 Phase | 1-1/8″ Shaft | 1745 RPM $ 1,340.00 Add to List DY36VF32 7.5 HP 3 Phase Motor | 1-3/8″ Shaft | 1760 RPM $ 1,775.00 Add to List DY36VF33 Dayton 10 HP Electric Motor | Three Phase | 1-3/8″ Shaft | 1755 RPM $ 2,110.00 Add to List DY6AJD1 Dayton 15 HP Electric Motor | Three Phase | 1-5/8″ Shaft | 1765 RPM $ 3,585.00 Add to List DY6K610 Dayton 3 HP Electric Motor | Single Phase | 1-1/8″ Shaft | 1740 RPM $ 1,760.00 Add to List DY6K847 Dayton 5 HP Electric Motor | Single Phase | 1-1/8″ Shaft | 1740 RPM $ 1,685.00 Add to List DY6K969 Dayton 7.5 HP Electric Motor | Single Phase | 1-3/8″ Shaft | 1740 RPM $ 4,200.00 Add to List DY6K970 Dayton 10 HP Electric Motor | Single Phase | 1-3/8″ Shaft | 1740 RPM $ 3,655.00 Add to List WEG01018ES1E215T WEG 10 HP Electric Motor | Single Phase | 1-3/8″ Shaft | 1800 RPM $ 2,125.00 Add to List WEG01218ES1E215T WEG 12.5 HP Electric Motor | Single Phase | 1-3/8″ Shaft | 1800 RPM $ 2,375.00 Add to List WEG01418ES1D215TZ-W22 WEG 14 HP Electric Motor | Single Phase | 1-5/8″ Shaft | 1730 RPM $ 3,025.00 Add to List Pulley (Must Add) PU34SHD 3.4″ SH DG Pulley $ 111.00 Add to List PU35118D 3.5″ X 1-1/8″ DG Pulley $ 180.00 Add to List Bushing (Select If Needed) PU138SHB 1-3/8″ SH Bushing $ 69.00 Add to List PU158SHB 1-5/8″ SH Bushing $ 70.00 Add to List Hydraulic Drive WFH08-2 Westfield 8″ Auger Hyd Drive Kit | For Transfer Augers & Utility Augers Up To 41′ $ 2,573.00 Add to List Loading… .qc_theme_nine > li { color: !important; font-size: px !important; background-color: !important; } .qc_theme_nine > li:hover { background: !important; } .qc_theme_nine > li.current { background: !important; } .ilist-section-25 ul.qc_nav_style_1 li { border: 1px solid !important; } .ilist-section-25 ul.qc_nav_style_1 li { color: !important; font-size: px !important; background-color: !important; } .ilist-section-25 ul.qc_nav_style_1 li:hover { background: !important; } .ilist-section-25 ul.qc_nav_style_1 li.current { background: !important; color: !important; } .ilist-section-25 ul.qc_nav_style_1 > li::after { background: !important; } .ilist-section-25 ul.qc_nav_style_1 li ul.qcld_children li{ /*color: #000 !important;*/ background: #fff !important; } .ilist-section-25 ul.qc_nav_style_1 li ul.qcld_children li:hover{ box-shadow: 4px 0px inset !important; } .ilist-section-25 ul.qc_nav_style_1 li .qcld_menu_status{ box-shadow: 4px 0px inset !important; } Accessories UMH10-3 10″ X 3′ Long Galvanized Flex Hose $ 95.00 UMH10-5 10″ X 5′ Long Galvanized Flex Hose $ 165.00 WFA103 Westfield Regular 48″ Poly Hopper | Fits 6″ – 8″ Augers $ 235.00 WFA119 Replacement Poly Hopper Strap (EACH) | For WFA103 $ 20.00 WFA126 UT8″ INTAKE FLIGHT SUPPORT KIT $ 136.00 WFA130 UT8″ METAL INTAKE HOPPER $ 274.00 WFA134 UT8″ TRUSS KIT $ 406.00 WFA136 30′ TRUSS CABLE KIT UT $ 303.00 WFA137 40′ TRUSS CABLE KIT UT $ 395.00 WFA140 UT8″ BOLT-ON TUBE CLAMP $ 132.00 WFA155 UT8 FEED CONTROL KIT $ 136.00 WFA164 Westfield Poly Bucket Flex Spout | 36″ – 5 Sections | Fits 8″ – 10″ Augers $ 254.00 WFA258 8″ Bolt-On Hopper Lid Kit $ 66.00 WFUSP805 8″ X 5′ Utility Extension $ 647.00 WFUSP810 8″ X 10′ Utility Extension $ 930.00 WFUSP815 8″ X 15′ Utility Extension $ 1,258.00 WFUSP825 8″ X 25′ Utility Extension $ 1,926.00 WFUSP830 8″ X 30′ Utility Extension $ 2,196.00

Westfield 8″ X 16′ Utility Auger – Upper Basic Section