36″ Trencher | SS Std/3PT Opt | 4″ Wide | 50/50 Std/Rock Teeth | 10-20GPM SS | 15-21GPM Tractor

36″ Trencher | SS Std/3PT Opt | 4″ Wide | 50/50 Std/Rock Teeth | 10-20GPM SS | 15-21GPM Tractor TN336 36″ Trencher | Univ Skid Std | 4″ Wide | 50/50 Std/Rock Teeth | 10-20 GPM SS – 15-21 GPM Tractor PRICE DOES NOT INCLUDE SETUP OR SHIPPING – PRICED FOB BV ATWOOD, KS *Hydraulic Hoses & Couplers Included *See 3PT Mounting Option Below *Skid Steer/Tractor Carrier Weight Needs To Be Between 2,000 – 5,000 lbs. A Quote Sign Off With Vehicle Make/Model Is Required Prior To Purchase. If This Unit Is Put On A Unit Outside Of This Range & The Motor Is Damaged, Warranty Will Be Voided.* Overview Features Replacement Chains 3PT Mounting Options TN336 Trencher for Skidsteer or Tractor Keep your cable or lines protected with the Baumalight TN336 Trencher. Rural property owners, landscapers or professional contractors can quickly cut trenches up to 36” deep and between 4” to 6” wide, depending on the chain option. The TN336 Trencher is powered by a planetary drive system. With no roller chain to worry about, the planetary drive unit delivers hydraulic power directly to the sprocket of the digging chain for optimal trenching performance. For even more versatility, the TN336 Trencher can be mounted to skidsteers between 2000 – 5000 lbs. or to a tractor using the optional 3-point hitch mount. TN236 TNM336B TN336 TN548 TN560 TN760 Mount Standard Mini skindsteer Bobcat mini skidsteer Universial skidsteer Universial skidsteer Universial skidsteer Universial skidsteer Trench depth 36″ 36″ 36″ 48″ 60″ 60″ Trench width 4″ to 6″ 4″ to 6″ 4″ to 6″ 6″ to 10″ 6″ to 10″ 6″ to 10″ Drive type Direct drive Direct drive Direct drive Planetary Planetary Planetary Main shaft size 1:10 taper hardened shaft 1:10 taper hardened shaft 1:10 taper hardened shaft 2-9/16″ solid hardened steel 2-9/16″ solid hardened steel 2-9/16″ solid hardened steel Trencher chain torque at 3,000 PSI 6,703 lbs-in 6,703 lbs-in 14,571 lbs-in 21,856 lbs-in 21,856 lbs-in 33,877 lbs-in Over torque protection Hydraulic relief Hydraulic relief Hydraulic relief Hydraulic relief Hydraulic relief Hydraulic relief Horse Power (HP) 10 – 25 10 – 25 30 – 55 40 – 100 40 – 100 40 – 100 Carrier weight (lb) 1,500 – 4,000 1,500 – 4,000 2,000 – 5,000 3,000 – 7,000 3,000 – 7,000 4,000 – 12,000 Min. / Max. GPM Skidsteer 7 to 18 7 to 18 10 to 20 12 to 25 12 to 25 20 to 42 Min. / Max. GPM Tractor N/A N/A 14 to 22 15 to 25 N/A N/A Weight 470 lb 675 lb 850 lb 1,250 lb 1,500 lb 1800 lb SIDE AUGER SIDE AUGER Baumalight Trenchers are designed with a convenient side auger. The side auger keeps the dirt clear from the trenching action but still near the trench when it’s time for back filling. CRUMB SCRAPER BAR CRUMB SCRAPER BAR The Trencher has a crumb scraper bar as standard equipment, this helps to scrape and sweep extra dirt and debris into the chain where it is lifted out of the trench. The heavy construction and hinged design mean that the scraper performs no matter what depth of trench you are digging. PLANETARY DRIVE SYSTEM PLANETARY DRIVE SYSTEM The sealed drive keeps the dirt out and the trencher going. The compact and stron g planetary drive unit delivers the hydraulic power directly to the sprocket of the digging chain for good digging performance. There are no roller chains that jump or stretch. Maximum torque transfer. The motor is mounted directly in-line with the main sprocket. SOLID STEEL NOSE SOLID STEEL NOSE The Baumalight Trencher’s heavy duty nose is precision machined from a piece of solid steel. It runs freely on dual tapered roller bearings to deal with the extreme forces of trenching. Dirt is the enemy of all bearings. A precision machined washer protects the bearings from rocks and dirt. This initial barricade is reinforced by the rubber seal on the bearings, finishing the job is the easily accessible grease fitting which keeps the bearings lubricated and protected from moisture and keeps our nose running freely. ADJUSTABLE CHAIN TENSION ADJUSTABLE CHAIN TENSION Adjusting the chain tension with a couple of pumps. The grease cylinder tensioner allows you to adjust the tension of the chain quickly with only a grease gun. By applying grease to an internal cylinder the roller nose is pushed forward taking the slack out of the chain. What could be a long frustrating process is now a few quick pumps. CHAIN COMPARISON Standard Cup Tooth Chain 50/50 Rock & Cup Tooth Chain This option with 50% bullet style teeth is best for rocky soil conditions WLM3604 Baumalight 36″x4″ 50/50 Standard Cup/Rock Tooth Replacement Chain $ 1,654.39 Add to List WLS3604 Baumalight 36″x4″ Standard Cup Tooth Replacement Chain $ 1,073.33 Add to List WLD001393 Baumalight 3-Point Bolt-On Hitch Adaptor | Cat I $ 1,275.75 Add to List WLD003074 Baumalight 3-Point Bolt-On Hitch Adaptor | Cat 2 $ 1,417.50 Add to List WLS1050 Baumalight Hyd Valve Kit | For Tractors With Only One Set Of Remotes | Add $550 If Shipped Later $ 1,018.00 Add to List

TN336 36″ Trencher | Univ Skid Std | 4″ Wide | 50/50 Std/Rock Teeth | 10-20 GPM SS – 15-21 GPM Tractor